java.lang.Object
- java.io.InputStream
- - java.io.ByteArrayInputStream

All Implemented Interfaces:

Closeable, AutoCloseable
```
public class ByteArrayInputStream
extends InputStream
```
A ByteArrayInputStream contains an internal buffer that contains bytes that may be read from the stream. An internal counter keeps track of the next byte to be supplied by the read method.
Closing a ByteArrayInputStream has no effect. The methods in this class can be called after the stream has been closed without generating an IOException.

Since:

1.0

See Also:

StringBufferInputStream

Field Summary

Fields
Modifier and Type	Field	Description
`protected byte[]`	`buf`	An array of bytes that was provided by the creator of the stream.
`protected int`	`count`	The index one greater than the last valid character in the input stream buffer.
`protected int`	`mark`	The currently marked position in the stream.
`protected int`	`pos`	The index of the next character to read from the input stream buffer.

Constructor Summary

Constructors
Constructor	Description
`ByteArrayInputStream(byte[] buf)`	Creates a `ByteArrayInputStream` so that it uses `buf` as its buffer array.
`ByteArrayInputStream(byte[] buf, int offset, int length)`	Creates `ByteArrayInputStream` that uses `buf` as its buffer array.

Method Summary

All Methods Instance Methods Concrete Methods
Modifier and Type	Method	Description
`int`	`available()`	Returns the number of remaining bytes that can be read (or skipped over) from this input stream.
`void`	`close()`	Closing a `ByteArrayInputStream` has no effect.
`void`	`mark(int readAheadLimit)`	Set the current marked position in the stream.
`boolean`	`markSupported()`	Tests if this `InputStream` supports mark/reset.
`int`	`read()`	Reads the next byte of data from this input stream.
`int`	`read(byte[] b, int off, int len)`	Reads up to `len` bytes of data into an array of bytes from this input stream.
`void`	`reset()`	Resets the buffer to the marked position.
`long`	`skip(long n)`	Skips `n` bytes of input from this input stream.

Methods declared in class java.io.InputStream
nullInputStream, read, readAllBytes, readNBytes, readNBytes, transferTo

Methods declared in class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

- Field Detail
  - buf
```
protected byte[] buf
```
    An array of bytes that was provided by the creator of the stream. Elements buf[0] through buf[count-1] are the only bytes that can ever be read from the stream; element buf[pos] is the next byte to be read.
  - pos
```
protected int pos
```
    The index of the next character to read from the input stream buffer. This value should always be nonnegative and not larger than the value of count. The next byte to be read from the input stream buffer will be buf[pos].
  - mark
```
protected int mark
```
    The currently marked position in the stream. ByteArrayInputStream objects are marked at position zero by default when constructed. They may be marked at another position within the buffer by the mark() method. The current buffer position is set to this point by the reset() method.
    If no mark has been set, then the value of mark is the offset passed to the constructor (or 0 if the offset was not supplied).
    
    Since:
    
    1.1
  - count
```
protected int count
```
    The index one greater than the last valid character in the input stream buffer. This value should always be nonnegative and not larger than the length of buf. It is one greater than the position of the last byte within buf that can ever be read from the input stream buffer.
- Constructor Detail
  - ByteArrayInputStream
```
public ByteArrayInputStream(byte[] buf)
```
    Creates a ByteArrayInputStream so that it uses buf as its buffer array. The buffer array is not copied. The initial value of pos is 0 and the initial value of count is the length of buf.
    
    Parameters:
    
    buf - the input buffer.
  - ByteArrayInputStream
```
public ByteArrayInputStream(byte[] buf,
                            int offset,
                            int length)
```
    Creates ByteArrayInputStream that uses buf as its buffer array. The initial value of pos is offset and the initial value of count is the minimum of offset+length and buf.length. The buffer array is not copied. The buffer's mark is set to the specified offset.
    
    Parameters:
    
    buf - the input buffer.
    
    offset - the offset in the buffer of the first byte to read.
    
    length - the maximum number of bytes to read from the buffer.
- Method Detail
  - read
```
public int read()
```
    Reads the next byte of data from this input stream. The value byte is returned as an int in the range 0 to 255. If no byte is available because the end of the stream has been reached, the value -1 is returned.
    This read method cannot block.
    
    Specified by:
    
    read in class InputStream
    
    Returns:
    
    the next byte of data, or -1 if the end of the stream has been reached.
  - read
```
public int read(byte[] b,
                int off,
                int len)
```
    Reads up to len bytes of data into an array of bytes from this input stream. If pos equals count, then -1 is returned to indicate end of file. Otherwise, the number k of bytes read is equal to the smaller of len and count-pos. If k is positive, then bytes buf[pos] through buf[pos+k-1] are copied into b[off] through b[off+k-1] in the manner performed by System.arraycopy. The value k is added into pos and k is returned.
    This read method cannot block.
    
    Overrides:
    
    read in class InputStream
    
    Parameters:
    
    b - the buffer into which the data is read.
    
    off - the start offset in the destination array b
    
    len - the maximum number of bytes read.
    
    Returns:
    
    the total number of bytes read into the buffer, or -1 if there is no more data because the end of the stream has been reached.
    
    Throws:
    
    NullPointerException - If b is null.
    
    IndexOutOfBoundsException - If off is negative, len is negative, or len is greater than b.length - off
    
    See Also:
    
    InputStream.read()
  - skip
```
public long skip(long n)
```
    Skips n bytes of input from this input stream. Fewer bytes might be skipped if the end of the input stream is reached. The actual number k of bytes to be skipped is equal to the smaller of n and count-pos. The value k is added into pos and k is returned.
    
    Overrides:
    
    skip in class InputStream
    
    Parameters:
    
    n - the number of bytes to be skipped.
    
    Returns:
    
    the actual number of bytes skipped.
  - available
```
public int available()
```
    Returns the number of remaining bytes that can be read (or skipped over) from this input stream.
    The value returned is count - pos, which is the number of bytes remaining to be read from the input buffer.
    
    Overrides:
    
    available in class InputStream
    
    Returns:
    
    the number of remaining bytes that can be read (or skipped over) from this input stream without blocking.
  - markSupported
```
public boolean markSupported()
```
    Tests if this InputStream supports mark/reset. The markSupported method of ByteArrayInputStream always returns true.
    
    Overrides:
    
    markSupported in class InputStream
    
    Returns:
    
    true if this stream instance supports the mark and reset methods; false otherwise.
    
    Since:
    
    1.1
    
    See Also:
    
    InputStream.mark(int), InputStream.reset()
  - mark
```
public void mark(int readAheadLimit)
```
    Set the current marked position in the stream. ByteArrayInputStream objects are marked at position zero by default when constructed. They may be marked at another position within the buffer by this method.
    If no mark has been set, then the value of the mark is the offset passed to the constructor (or 0 if the offset was not supplied).
    Note: The readAheadLimit for this class has no meaning.
    
    Overrides:
    
    mark in class InputStream
    
    Parameters:
    
    readAheadLimit - the maximum limit of bytes that can be read before the mark position becomes invalid.
    
    Since:
    
    1.1
    
    See Also:
    
    InputStream.reset()
  - reset
```
public void reset()
```
    Resets the buffer to the marked position. The marked position is 0 unless another position was marked or an offset was specified in the constructor.
    
    Overrides:
    
    reset in class InputStream
    
    See Also:
    
    InputStream.mark(int), IOException
  - close
```
public void close()
           throws IOException
```
    Closing a ByteArrayInputStream has no effect. The methods in this class can be called after the stream has been closed without generating an IOException.
    
    Specified by:
    
    close in interface AutoCloseable
    
    Specified by:
    
    close in interface Closeable
    
    Overrides:
    
    close in class InputStream
    
    Throws:
    
    IOException - if an I/O error occurs.

Class ByteArrayInputStream

Field Summary

Constructor Summary

Method Summary

Methods declared in class java.io.InputStream

Methods declared in class java.lang.Object

Field Detail

buf

pos

mark

count

Constructor Detail

ByteArrayInputStream

ByteArrayInputStream

Method Detail

read

read

skip

available

markSupported

mark

reset

close