Module java.base
Package javax.net.ssl

Class X509ExtendedTrustManager

  • All Implemented Interfaces:
    TrustManager, X509TrustManager
    public abstract class X509ExtendedTrustManager
extends Object
implements X509TrustManager
    Extensions to the X509TrustManager interface to support SSL/TLS/DTLS connection sensitive trust management.

    To prevent man-in-the-middle attacks, hostname checks can be done to verify that the hostname in an end-entity certificate matches the targeted hostname. TLS/DTLS does not require such checks, but some protocols over TLS/DTLS (such as HTTPS) do. In earlier versions of the JDK, the certificate chain checks were done at the SSL/TLS/DTLS layer, and the hostname verification checks were done at the layer over TLS/DTLS. This class allows for the checking to be done during a single call to this class.

    RFC 2830 defines the server identification specification for the "LDAPS" algorithm. RFC 2818 defines both the server identification and the client identification specification for the "HTTPS" algorithm.

    Since:
    1.7
    See Also:
    X509TrustManager, HostnameVerifier

    • Constructor Detail

      • X509ExtendedTrustManager

        public X509ExtendedTrustManager()

    • Method Detail

      • checkClientTrusted

        public abstract void checkClientTrusted​(X509Certificate[] chain,
                                        String authType,
                                        Socket socket)
                                 throws CertificateException
        Given the partial or complete certificate chain provided by the peer, build and validate the certificate path based on the authentication type and ssl parameters.

        The authentication type is determined by the actual certificate used. For instance, if RSAPublicKey is used, the authType should be "RSA". Checking is case-sensitive.

        If the socket parameter is an instance of SSLSocket, and the endpoint identification algorithm of the SSLParameters is non-empty, to prevent man-in-the-middle attacks, the address that the socket connected to should be checked against the peer's identity presented in the end-entity X509 certificate, as specified in the endpoint identification algorithm.

        If the socket parameter is an instance of SSLSocket, and the algorithm constraints of the SSLParameters is non-null, for every certificate in the certification path, fields such as subject public key, the signature algorithm, key usage, extended key usage, etc. need to conform to the algorithm constraints in place on this socket.

        Parameters:
        chain - the peer certificate chain
        authType - the key exchange algorithm used
        socket - the socket used for this connection. This parameter can be null, which indicates that implementations need not check the ssl parameters
        Throws:
        IllegalArgumentException - if null or zero-length array is passed in for the chain parameter or if null or zero-length string is passed in for the authType parameter
        CertificateException - if the certificate chain is not trusted by this TrustManager
        See Also:
        SSLParameters.getEndpointIdentificationAlgorithm(), SSLParameters.setEndpointIdentificationAlgorithm(String), SSLParameters.getAlgorithmConstraints(), SSLParameters.setAlgorithmConstraints(AlgorithmConstraints)

      • checkServerTrusted

        public abstract void checkServerTrusted​(X509Certificate[] chain,
                                        String authType,
                                        Socket socket)
                                 throws CertificateException
        Given the partial or complete certificate chain provided by the peer, build and validate the certificate path based on the authentication type and ssl parameters.

        The authentication type is the key exchange algorithm portion of the cipher suites represented as a String, such as "RSA", "DHE_DSS". Note: for some exportable cipher suites, the key exchange algorithm is determined at run time during the handshake. For instance, for TLS_RSA_EXPORT_WITH_RC4_40_MD5, the authType should be RSA_EXPORT when an ephemeral RSA key is used for the key exchange, and RSA when the key from the server certificate is used. Checking is case-sensitive.

        If the socket parameter is an instance of SSLSocket, and the endpoint identification algorithm of the SSLParameters is non-empty, to prevent man-in-the-middle attacks, the address that the socket connected to should be checked against the peer's identity presented in the end-entity X509 certificate, as specified in the endpoint identification algorithm.

        If the socket parameter is an instance of SSLSocket, and the algorithm constraints of the SSLParameters is non-null, for every certificate in the certification path, fields such as subject public key, the signature algorithm, key usage, extended key usage, etc. need to conform to the algorithm constraints in place on this socket.

        Parameters:
        chain - the peer certificate chain
        authType - the key exchange algorithm used
        socket - the socket used for this connection. This parameter can be null, which indicates that implementations need not check the ssl parameters
        Throws:
        IllegalArgumentException - if null or zero-length array is passed in for the chain parameter or if null or zero-length string is passed in for the authType parameter
        CertificateException - if the certificate chain is not trusted by this TrustManager
        See Also:
        SSLParameters.getEndpointIdentificationAlgorithm(), SSLParameters.setEndpointIdentificationAlgorithm(String), SSLParameters.getAlgorithmConstraints(), SSLParameters.setAlgorithmConstraints(AlgorithmConstraints)

      • checkClientTrusted

        public abstract void checkClientTrusted​(X509Certificate[] chain,
                                        String authType,
                                        SSLEngine engine)
                                 throws CertificateException
        Given the partial or complete certificate chain provided by the peer, build and validate the certificate path based on the authentication type and ssl parameters.

        The authentication type is determined by the actual certificate used. For instance, if RSAPublicKey is used, the authType should be "RSA". Checking is case-sensitive.

        If the engine parameter is available, and the endpoint identification algorithm of the SSLParameters is non-empty, to prevent man-in-the-middle attacks, the address that the engine connected to should be checked against the peer's identity presented in the end-entity X509 certificate, as specified in the endpoint identification algorithm.

        If the engine parameter is available, and the algorithm constraints of the SSLParameters is non-null, for every certificate in the certification path, fields such as subject public key, the signature algorithm, key usage, extended key usage, etc. need to conform to the algorithm constraints in place on this engine.

        Parameters:
        chain - the peer certificate chain
        authType - the key exchange algorithm used
        engine - the engine used for this connection. This parameter can be null, which indicates that implementations need not check the ssl parameters
        Throws:
        IllegalArgumentException - if null or zero-length array is passed in for the chain parameter or if null or zero-length string is passed in for the authType parameter
        CertificateException - if the certificate chain is not trusted by this TrustManager
        See Also:
        SSLParameters.getEndpointIdentificationAlgorithm(), SSLParameters.setEndpointIdentificationAlgorithm(String), SSLParameters.getAlgorithmConstraints(), SSLParameters.setAlgorithmConstraints(AlgorithmConstraints)

      • checkServerTrusted

        public abstract void checkServerTrusted​(X509Certificate[] chain,
                                        String authType,
                                        SSLEngine engine)
                                 throws CertificateException
        Given the partial or complete certificate chain provided by the peer, build and validate the certificate path based on the authentication type and ssl parameters.

        The authentication type is the key exchange algorithm portion of the cipher suites represented as a String, such as "RSA", "DHE_DSS". Note: for some exportable cipher suites, the key exchange algorithm is determined at run time during the handshake. For instance, for TLS_RSA_EXPORT_WITH_RC4_40_MD5, the authType should be RSA_EXPORT when an ephemeral RSA key is used for the key exchange, and RSA when the key from the server certificate is used. Checking is case-sensitive.

        If the engine parameter is available, and the endpoint identification algorithm of the SSLParameters is non-empty, to prevent man-in-the-middle attacks, the address that the engine connected to should be checked against the peer's identity presented in the end-entity X509 certificate, as specified in the endpoint identification algorithm.

        If the engine parameter is available, and the algorithm constraints of the SSLParameters is non-null, for every certificate in the certification path, fields such as subject public key, the signature algorithm, key usage, extended key usage, etc. need to conform to the algorithm constraints in place on this engine.

        Parameters:
        chain - the peer certificate chain
        authType - the key exchange algorithm used
        engine - the engine used for this connection. This parameter can be null, which indicates that implementations need not check the ssl parameters
        Throws:
        IllegalArgumentException - if null or zero-length array is passed in for the chain parameter or if null or zero-length string is passed in for the authType parameter
        CertificateException - if the certificate chain is not trusted by this TrustManager
        See Also:
        SSLParameters.getEndpointIdentificationAlgorithm(), SSLParameters.setEndpointIdentificationAlgorithm(String), SSLParameters.getAlgorithmConstraints(), SSLParameters.setAlgorithmConstraints(AlgorithmConstraints)