Documentation Contents

LDAP Naming Service Provider for the
Java Naming and Directory Interface (JNDI)

Table of Contents

1. Introduction
2. Conformance
3. Environment Properties
4. Names
5. Attributes
6. URLs
7. Java Objects
8. Schema
9. Exceptions
10. API Mapping
11. Federation
12. Event Notification
13. SASL Authentication
14. SSL and Start TLS
15. Connection Pooling
16. Security Considerations

1. Introduction

This document describes the features of the LDAP service provider. A major portion of the description is couched in terms of how the LDAP service provider behaves with respect to the descriptions in Guidelines for LDAP Service Providers. For examples and descriptions of how to use this provider, please see the JNDI Tutorial.

The LDAP service provider implements the basic features for LDAP access. Additional functionality, such as support for a number of popular LDAP controls, and for storing and reading RMI and CORBA objects, can be added to the basic provider by installing a booster pack, available for download at the JNDI Web site.

2. Conformance

3. Environment Properties

3.1 JNDI Properties

3.2 LDAP-specific Properties

3.3 SASL-specific Properties

3.4 Provider-specific Properties

com.sun.jndi.ldap.connect.pool

This property is used to specify that a pooled connection should be used when creating the initial context instance. If its value is "true", the provider will use a pooled connection if the parameters for creating a connection (referred to as the connection request) meet the criteria set forth by the connection pool configuration. If this property has not been set, or if it has been set to any other value, or if the connection request does not meet the criteria, the provider will not use a pooled connection. See the Connection Pooling section for more information on connection pooling.

For example, the following code

env.put("com.sun.jndi.ldap.connect.pool",
"true");

com.sun.jndi.ldap.connect.timeout

The value of this property is the string representation of an integer representing the connection timeout in milliseconds. If the LDAP provider cannot establish a connection within that period, it aborts the connection attempt. The integer should be greater than zero. An integer less than or equal to zero means to use the network protocol's (i.e., TCP's) timeout value.

If this property is not specified, the default is to wait for the connection to be established or until the underlying network times out.

For example,

env.put("com.sun.jndi.ldap.connect.timeout", "500"); causes the LDAP service provider to abort the connection attempt if a connection cannot be established in half a second.

When connection pooling has been requested for a connection, this property also determines the maximum wait time for a connection when all connections in the pool are in use and the maximum pool size has been reached. If the value of this property is less than or equal to zero under such circumstances, the provider will wait indefinitely for a connection to become available; otherwise, the provider will abort the wait when the maximum wait time has been exceeded. See the Connection Pooling section for details.

com.sun.jndi.ldap.read.timeout

The value of this property is the string representation of an integer representing the read timeout in milliseconds for LDAP operations. If the LDAP provider cannot get a LDAP response within that period, it aborts the read attempt. The integer should be greater than zero. An integer less than or equal to zero means no read timeout is specified which is equivalent to waiting for the response infinitely until it is received.

If this property is not specified, the default is to wait for the response until it is received.

For example,

env.put("com.sun.jndi.ldap.read.timeout", "5000"); causes the LDAP service provider to abort the read attempt if the server does not respond with a reply within 5 seconds.

com.sun.jndi.ldap.netscape.schemaBugs

The Netscape Directory Server 4.0 and earlier releases do not support schema entries that comply with RFC 2252. Specifically, contrary to RFC 2252, the Netscape server requires OIDs (such as those for SUP and SYNTAX) be delimited by single quotes and MUST/MAY lists be enclosed by parentheses. When you update the schema of the Netscape Directory Server 4.0, you need to use this property to get around these problems.

The following values are defined for this property:

        true
           activate the workaround.
        false
           do not activate the workaround.

If this property is not set then its default value is false.

For example,

env.put("com.sun.jndi.ldap.netscape.schemaBugs", "true");

NOTE 1: This property may only be passed to the initial context and becomes fixed for the provider. It is unaffected by the addToEnvironment or removeFromEnvironment methods.

NOTE 2: If you are using Netscape Directory Server 4.1, do not use this property. The 4.1 server has problems parsing object class definitions that contain MUST/MAY clauses without parentheses. If you are creating or modifying an object class definition that contains a single MUST/MAY item, work around the bug by adding a superfluous value (such as 'objectClass') to the MUST/MAY list.

com.sun.jndi.ldap.trace.ber

The value of this property is a java.io.OutputStream object into which a hexadecimal dump of the incoming and outgoing LDAP ASN.1 BER packets is written. No default is defined for this property.

For example,

env.put("com.sun.jndi.ldap.trace.ber",
System.out);

NOTE: This property may only be passed to the initial context and becomes fixed for the provider. It is unaffected by the addToEnvironment or removeFromEnvironment methods.

4. Names

The name parser returned by an invocation of getNameParser() returns a parser that, when given a string name, parses it into components in accordance with RFC 2253.

5. Attributes

Some LDAP servers support attribute subtyping, attribute name synonyms, and language codes for specifying language preferences for attribute values. In such cases, the attribute name returned by an LDAP server may be different from the one which was requested.

In LDAP, attribute names are case-insensitive. Therefore, when creating a collection of attributes to be passed as a parameter to JNDI operations, it is recommended to use a case-insensitive attributes class. For example,

        Attributes attrs = new BasicAttributes(true); // ignoreCase=true

For all attribute values, regardless of whether they are String or byte[], you need to know the syntax and format of the attribute value. You can typically find this out by reading the schema document in which the attribute and its syntax is defined.

When attributes are supplied as arguments to JNDI calls then they must satisfy whatever schema is enforced at the LDAP directory.  In particular, the objectClass attribute is normally required when creating a new LDAP entry (for example, when using Context.bind, Context.rebind or DirContext.createSubcontext).

6. URLs

6.1 Uses

It supports the following use of URLs:
 

6.2 Automatic Discovery of LDAP Service

For example, given a URL of ldap:///dc=example,dc=com, the service provider will try to locate the DNS SRV records for _ldap._tcp.example.com. If the provider finds such records, it will then extract and use the hostnames and ports of the LDAP servers from the records. The order in which it uses these records follows the algorithm described in the Internet draft draft-ietf-ldapext-locate-08.txt.

For locating the DNS SRV records of the LDAP service, the LDAP service provider uses the DNS service configured for the underlying platform (on Solaris or Linux, for example, the DNS client configuration is read from the /etc/resolv.conf file). If DNS has not been configured for the underlying platform, the LDAP service provider will use localhost and 53 as the hostname and port of the DNS server. If no DNS service is available, or if the DNS service does not have the LDAP service's SRV records, the LDAP service provider will use localhost as the hostname, and 389 as the port for a plain connection and 636 as the port for an SSL connection.

7. Java Objects

See the JNDI Tutorial for examples.

8. Schema

9. Exceptions

10. API Mapping

11. Federation

The LDAP service provider treats composite names as strongly separated. That is, it processes the first component of the composite name as a distinguished name and the rest of the components as names in the next naming system(s). For example, here are examples that lists the root of the next naming system federated beyond an LDAP context and looks up a name using a multicomponent composite name:

// List the root of the nns, 
// Note use of the trailing slash to indicate traversal into the nns
NamingEnumeration enum = ctx.list("cn=objects,ou=Sales/");

// A composite name lookup
Object obj = ctx.lookup("cn=objects,ou=Sales/some/x/y/z");

12. Event Notification

* The persistent search control is defined in the IETF Internet-Draft draft-ietf-ldapext-psearch-03.txt.

13. SASL Authentication

The LDAP service provider supports the following SASL mechanisms.

• EXTERNAL (RFC 2222). This mechanism obtains authentication information from an external source (such as SSL/TLS or IPsec).
• DIGEST-MD5 (RFC 2831) is for Digest Authentication.
• GSSAPI (RFC 2222) is for Kerberos V5 authentication.

14. SSL and Start TLS

14.1 SSL

When SSL is being used and no port has been specified, 636 is used as the default port.

14.2 Start TLS

15. Connection Pooling

15.1 Overview

The LDAP service provider supports connection pooling by maintaining pools of previously used connections. Whenever the LDAP provider needs a connection (and the application has requested pooling), it gets a connection from the pool. If an existing connection is available, it will be used. If no existing connection is available, a new connection is created and used. When the provider is done with the connection, the connection is marked idle and can be reused.

An application requests connection pooling by adding the property, com.sun.jndi.ldap.connect.pool, to the environment properties passed to the initial context constructor. An application can decide whether to use pooling on a per-context basis by using environment properties with and without this property. This same mechanism is used to control whether pooled connections are used for referral handling and processing of LDAP/LDAPS URLs passed to the initial context. For example, when this property is present in the environment when the provider is processing a referral, the provider will use a pooled connection for the referral.

Here is sample code that requests that connection pooling be used for a new initial context and all contexts derived from it.

Hashtable env = new Hashtable();
env.put("com.sun.jndi.ldap.connect.pool", "true");
env.put(Context.PROVIDER_URL, url);
env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.ldap.LdapCtxFactory");
DirContext ctx = new InitialDirContext(env);
...

Only the addition of the single property, com.sun.jndi.ldap.connect.pool, is required; no other changes are required to the application.

The LDAP provider keeps track of whether a connection is being used through indications from the application. It assumes that an application that is maintaining an open context handle is using the connection. Therefore, in order for the LDAP provider to properly manage the pooled connections, the application must be diligent about invoking Context.close() on contexts that it no longer needs.

Bad connections are automatically detected and removed from the pool. The probability of a context ending up with a bad connection is the same regardless of whether connection pooling is used.

15.2 When Not to Use Pooling

15.3 Global Configuration

Connection pooling is configured by a number of System properties at runtime startup time. Note that these are System properties, not environment properties and that they affect all connection pooling requests.

Here is a summary of the system properties. They are described in more detail in the rest of this section.

Here is an example that sets the maximum pool size to 20, the preferred pool size to 10, and the idle timeout to 5 minutes for pooled connections.

# java -Dcom.sun.jndi.ldap.connect.pool.maxsize=20 \
       -Dcom.sun.jndi.ldap.connect.pool.prefsize=10 \
       -Dcom.sun.jndi.ldap.connect.pool.timeout=300000 \
    YourProgram

15.3.1 What Gets Pooled

To allow SSL connections to be pooled, include the string "ssl" in the com.sun.jndi.ldap.connect.pool.protocol System property. For example, to allow both plain and SSL connections to be pooled, set this System property to the string "plain ssl".

To allow DIGEST-MD5 connections to be pooled, include the string "DIGEST-MD5" in the com.sun.jndi.ldap.connect.pool.authentication System property. For example, to allow connections of anonymous, simple and DIGEST-MD5 authentication types to be pooled, set this System property to the string "none simple DIGEST-MD5".

15.3.2 How Connections are Pooled

A connection identity is the set of the parameters required to create a possibly authenticated LDAP connection. Its composition depends on the authentication type of the request, as shown in the following table.

15.3.3 Pooling Custom Socket Factory Connections

    public class CustomSocketFactory extends SocketFactory
                implements Comparator<SocketFactory> { 
       :
       :
       public int compare(SocketFactory sf1, SocketFactory sf2) {
           :
           :
           // do whatever comparison that's required
       }
    }

If the socket factory class does not implement Comparator interface, the connections from that socket factory class do not get pooled. This requirement for implementing the Comparator interface is to ensure that the LDAP Service Provider does the necessary checks when comparing connections from different socket factories whose implementation is not known to the provider.

15.3.4 Pool Sizes

The initial pool size is the number of connections per connection identity that the LDAP service provider creates when first creating the pool (which corresponds to when the application first requests a pooled connection for that connection identity). Authentication of each connection in the pool is performed on demand, as the connection gets used. By default, the initial pool size is 1 and can be changed by using the System property com.sun.jndi.ldap.connect.pool.initsize. It is typically used at application start-up time to prime the pool with a certain number of connections to a server.

The maximum pool size is the maximum number of connections per connection identity that can be maintained concurrently by the LDAP service provider. Both in-use and idle connections contribute to this number. When the pool size reaches this number, no new connection for the corresponding connection identity may be created until a connection in the pool has been removed (i.e., the physical connection is closed). When the pool size reaches the maximum and all of the connections in the pool are in use, the application's request for a connection from that pool is blocked until a connection in the pool either becomes idle or is removed. A maximum pool size of 0 means that there is no maximum size: A request for a pooled connection will use an existing pooled idle connection or a newly created pooled connection.

The preferred pool size is the preferred number of connections per connection identity that the LDAP service provider should maintain. Both in-use and idle connections contribute to this number. When an application requests the use of a pooled connection and the pool size is less than the preferred size, the LDAP provider will create and use a new pooled connection regardless of whether an idle connection is availble. When an application is finished with a pooled connection (by invoking Context.close() on all contexts that share the connection) and the pool size is greater than the preferred size, the LDAP provider will close and remove the pooled connection from the pool. A preferred pool size of 0 means that there is no preferred size: A request for a pooled connection will result in a newly created connection only if no idle ones are available.

Note that the maximum pool size overrides both the initial and preferred pool sizes. For example, setting the preferred pool size greater than the maximum pool size is effectively setting it to the maximum pool size.

15.3.5 Idle Connections

15.4 Per-Context Configuration

15.4.1 Enabling Pooling

If this property is omitted, the context will not use connection pooling.

15.4.2 Connection Timeout

If this property has not been specified, the LDAP provider will wait indefinitely for a pooled connection to become available, and to wait for the default TCP timeout to take effect when creating a new connection.

Note that this property is different from the System property com.sun.jndi.ldap.connect.pool.timeout, which is related to the removal of idle pooled connections.

16. Security Considerations

permission java.net.SocketPermission "host[:port]", "connect";

For each host/port identified in the java.naming.factory.initial property and in URL string names supplied to context methods.

permission java.net.SocketPermission "host[:port]", "connect,accept";

For each host/port named in the URL strings in References and javaCodebase attributes stored with Serializable objects.

permission java.lang.RuntimePermission "setFactory"

permission javax.security.auth.AuthPermission "createLoginContext.appClassName";
permission javax.security.auth.AuthPermission "doAsPrivileged";

For the application class that's going to be logging in and invoking the doAsPrivileged method.

permission java.net.SocketPermission "host[:port]", "connect";

For the host/port of the Kerberos Key Distribution Center (KDC).

permission javax.security.auth.kerberos.ServicePermission "krbtgt/realm@realm", "initiate";
permission javax.security.auth.kerberos.ServicePermission "ldap/fully-qualified-hostname@realm", "initiate";

For the realm and host of the LDAP service and KDC.

---

Copyright © 1993, 2014, Oracle and/or its affiliates. All rights reserved.

Contact Us