All Implemented Interfaces:

Serializable, Comparable<Float>
```
public final class Float
extends Number
implements Comparable<Float>
```
The Float class wraps a value of primitive type float in an object. An object of type Float contains a single field whose type is float.
In addition, this class provides several methods for converting a float to a String and a String to a float, as well as other constants and methods useful when dealing with a float.

Since:

1.0

See Also:

Serialized Form

Field Summary

Fields
Modifier and Type	Field	Description
`static int`	`BYTES`	The number of bytes used to represent a `float` value.
`static int`	`MAX_EXPONENT`	Maximum exponent a finite `float` variable may have.
`static float`	`MAX_VALUE`	A constant holding the largest positive finite value of type `float`, (2-2^-23)·2¹²⁷.
`static int`	`MIN_EXPONENT`	Minimum exponent a normalized `float` variable may have.
`static float`	`MIN_NORMAL`	A constant holding the smallest positive normal value of type `float`, 2^-126.
`static float`	`MIN_VALUE`	A constant holding the smallest positive nonzero value of type `float`, 2^-149.
`static float`	`NaN`	A constant holding a Not-a-Number (NaN) value of type `float`.
`static float`	`NEGATIVE_INFINITY`	A constant holding the negative infinity of type `float`.
`static float`	`POSITIVE_INFINITY`	A constant holding the positive infinity of type `float`.
`static int`	`SIZE`	The number of bits used to represent a `float` value.
`static Class<Float>`	`TYPE`	The `Class` instance representing the primitive type `float`.

Constructor Summary

Constructors
Constructor	Description
`Float(double value)`	Deprecated. It is rarely appropriate to use this constructor.
`Float(float value)`	Deprecated. It is rarely appropriate to use this constructor.
`Float(String s)`	Deprecated. It is rarely appropriate to use this constructor.

Method Summary

All Methods Static Methods Instance Methods Concrete Methods
Modifier and Type	Method	Description
`byte`	`byteValue()`	Returns the value of this `Float` as a `byte` after a narrowing primitive conversion.
`static int`	`compare(float f1, float f2)`	Compares the two specified `float` values.
`int`	`compareTo(Float anotherFloat)`	Compares two `Float` objects numerically.
`double`	`doubleValue()`	Returns the value of this `Float` as a `double` after a widening primitive conversion.
`boolean`	`equals(Object obj)`	Compares this object against the specified object.
`static int`	`floatToIntBits(float value)`	Returns a representation of the specified floating-point value according to the IEEE 754 floating-point "single format" bit layout.
`static int`	`floatToRawIntBits(float value)`	Returns a representation of the specified floating-point value according to the IEEE 754 floating-point "single format" bit layout, preserving Not-a-Number (NaN) values.
`float`	`floatValue()`	Returns the `float` value of this `Float` object.
`int`	`hashCode()`	Returns a hash code for this `Float` object.
`static int`	`hashCode(float value)`	Returns a hash code for a `float` value; compatible with `Float.hashCode()`.
`static float`	`intBitsToFloat(int bits)`	Returns the `float` value corresponding to a given bit representation.
`int`	`intValue()`	Returns the value of this `Float` as an `int` after a narrowing primitive conversion.
`static boolean`	`isFinite(float f)`	Returns `true` if the argument is a finite floating-point value; returns `false` otherwise (for NaN and infinity arguments).
`boolean`	`isInfinite()`	Returns `true` if this `Float` value is infinitely large in magnitude, `false` otherwise.
`static boolean`	`isInfinite(float v)`	Returns `true` if the specified number is infinitely large in magnitude, `false` otherwise.
`boolean`	`isNaN()`	Returns `true` if this `Float` value is a Not-a-Number (NaN), `false` otherwise.
`static boolean`	`isNaN(float v)`	Returns `true` if the specified number is a Not-a-Number (NaN) value, `false` otherwise.
`long`	`longValue()`	Returns value of this `Float` as a `long` after a narrowing primitive conversion.
`static float`	`max(float a, float b)`	Returns the greater of two `float` values as if by calling `Math.max`.
`static float`	`min(float a, float b)`	Returns the smaller of two `float` values as if by calling `Math.min`.
`static float`	`parseFloat(String s)`	Returns a new `float` initialized to the value represented by the specified `String`, as performed by the `valueOf` method of class `Float`.
`short`	`shortValue()`	Returns the value of this `Float` as a `short` after a narrowing primitive conversion.
`static float`	`sum(float a, float b)`	Adds two `float` values together as per the + operator.
`static String`	`toHexString(float f)`	Returns a hexadecimal string representation of the `float` argument.
`String`	`toString()`	Returns a string representation of this `Float` object.
`static String`	`toString(float f)`	Returns a string representation of the `float` argument.
`static Float`	`valueOf(float f)`	Returns a `Float` instance representing the specified `float` value.
`static Float`	`valueOf(String s)`	Returns a `Float` object holding the `float` value represented by the argument string `s`.

Methods declared in class java.lang.Object
clone, finalize, getClass, notify, notifyAll, wait, wait, wait

Field Detail
- POSITIVE_INFINITY
```
public static final float POSITIVE_INFINITY
```
  A constant holding the positive infinity of type float. It is equal to the value returned by Float.intBitsToFloat(0x7f800000).
  
  See Also:
  
  Constant Field Values
- NEGATIVE_INFINITY
```
public static final float NEGATIVE_INFINITY
```
  A constant holding the negative infinity of type float. It is equal to the value returned by Float.intBitsToFloat(0xff800000).
  
  See Also:
  
  Constant Field Values
- NaN
```
public static final float NaN
```
  A constant holding a Not-a-Number (NaN) value of type float. It is equivalent to the value returned by Float.intBitsToFloat(0x7fc00000).
  
  See Also:
  
  Constant Field Values
- MAX_VALUE
```
public static final float MAX_VALUE
```
  A constant holding the largest positive finite value of type float, (2-2^-23)·2¹²⁷. It is equal to the hexadecimal floating-point literal 0x1.fffffeP+127f and also equal to Float.intBitsToFloat(0x7f7fffff).
  
  See Also:
  
  Constant Field Values
- MIN_NORMAL
```
public static final float MIN_NORMAL
```
  A constant holding the smallest positive normal value of type float, 2^-126. It is equal to the hexadecimal floating-point literal 0x1.0p-126f and also equal to Float.intBitsToFloat(0x00800000).
  
  Since:
  
  1.6
  
  See Also:
  
  Constant Field Values
- MIN_VALUE
```
public static final float MIN_VALUE
```
  A constant holding the smallest positive nonzero value of type float, 2^-149. It is equal to the hexadecimal floating-point literal 0x0.000002P-126f and also equal to Float.intBitsToFloat(0x1).
  
  See Also:
  
  Constant Field Values
- MAX_EXPONENT
```
public static final int MAX_EXPONENT
```
  Maximum exponent a finite float variable may have. It is equal to the value returned by Math.getExponent(Float.MAX_VALUE).
  
  Since:
  
  1.6
  
  See Also:
  
  Constant Field Values
- MIN_EXPONENT
```
public static final int MIN_EXPONENT
```
  Minimum exponent a normalized float variable may have. It is equal to the value returned by Math.getExponent(Float.MIN_NORMAL).
  
  Since:
  
  1.6
  
  See Also:
  
  Constant Field Values
- SIZE
```
public static final int SIZE
```
  The number of bits used to represent a float value.
  
  Since:
  
  1.5
  
  See Also:
  
  Constant Field Values
- BYTES
```
public static final int BYTES
```
  The number of bytes used to represent a float value.
  
  Since:
  
  1.8
  
  See Also:
  
  Constant Field Values
- TYPE
```
public static final Class<Float> TYPE
```
  The Class instance representing the primitive type float.
  
  Since:
  
  1.1

Constructor Detail
- Float
```
@Deprecated(since="9")
public Float(float value)
```
  Deprecated.
  It is rarely appropriate to use this constructor. The static factory valueOf(float) is generally a better choice, as it is likely to yield significantly better space and time performance.
  
  Constructs a newly allocated Float object that represents the primitive float argument.
  
  Parameters:
  
  value - the value to be represented by the Float.
- Float
```
@Deprecated(since="9")
public Float(double value)
```
  Deprecated.
  It is rarely appropriate to use this constructor. Instead, use the static factory method valueOf(float) method as follows: Float.valueOf((float)value).
  
  Constructs a newly allocated Float object that represents the argument converted to type float.
  
  Parameters:
  
  value - the value to be represented by the Float.
- Float
```
@Deprecated(since="9")
public Float(String s)
      throws NumberFormatException
```
  Deprecated.
  It is rarely appropriate to use this constructor. Use parseFloat(String) to convert a string to a float primitive, or use valueOf(String) to convert a string to a Float object.
  
  Constructs a newly allocated Float object that represents the floating-point value of type float represented by the string. The string is converted to a float value as if by the valueOf method.
  
  Parameters:
  
  s - a string to be converted to a Float.
  
  Throws:
  
  NumberFormatException - if the string does not contain a parsable number.

Method Detail

toString
```
public static String toString(float f)
```
Returns a string representation of the float argument. All characters mentioned below are ASCII characters.
- If the argument is NaN, the result is the string "NaN".
- Otherwise, the result is a string that represents the sign and magnitude (absolute value) of the argument. If the sign is negative, the first character of the result is '-' ('\u002D'); if the sign is positive, no sign character appears in the result. As for the magnitude m:
  - If m is infinity, it is represented by the characters "Infinity"; thus, positive infinity produces the result "Infinity" and negative infinity produces the result "-Infinity".
  - If m is zero, it is represented by the characters "0.0"; thus, negative zero produces the result "-0.0" and positive zero produces the result "0.0".
  - If m is greater than or equal to 10^-3 but less than 10⁷, then it is represented as the integer part of m, in decimal form with no leading zeroes, followed by '.' ('\u002E'), followed by one or more decimal digits representing the fractional part of m.
  - If m is less than 10^-3 or greater than or equal to 10⁷, then it is represented in so-called "computerized scientific notation." Let n be the unique integer such that 10ⁿ≤ m < 10ⁿ⁺¹; then let a be the mathematically exact quotient of m and 10ⁿ so that 1 ≤ a < 10. The magnitude is then represented as the integer part of a, as a single decimal digit, followed by '.' ('\u002E'), followed by decimal digits representing the fractional part of a, followed by the letter 'E' ('\u0045'), followed by a representation of n as a decimal integer, as produced by the method Integer.toString(int).
How many digits must be printed for the fractional part of m or a? There must be at least one digit to represent the fractional part, and beyond that as many, but only as many, more digits as are needed to uniquely distinguish the argument value from adjacent values of type float. That is, suppose that x is the exact mathematical value represented by the decimal representation produced by this method for a finite nonzero argument f. Then f must be the float value nearest to x; or, if two float values are equally close to x, then f must be one of them and the least significant bit of the significand of f must be 0.
To create localized string representations of a floating-point value, use subclasses of NumberFormat.
Parameters:

f - the float to be converted.

Returns:

a string representation of the argument.

toHexString

public static String toHexString(float f)

Returns a hexadecimal string representation of the float argument. All characters mentioned below are ASCII characters.

If the argument is NaN, the result is the string "NaN".
Otherwise, the result is a string that represents the sign and magnitude (absolute value) of the argument. If the sign is negative, the first character of the result is '-' ('\u002D'); if the sign is positive, no sign character appears in the result. As for the magnitude m:
- If m is infinity, it is represented by the string "Infinity"; thus, positive infinity produces the result "Infinity" and negative infinity produces the result "-Infinity".
- If m is zero, it is represented by the string "0x0.0p0"; thus, negative zero produces the result "-0x0.0p0" and positive zero produces the result "0x0.0p0".
- If m is a float value with a normalized representation, substrings are used to represent the significand and exponent fields. The significand is represented by the characters "0x1." followed by a lowercase hexadecimal representation of the rest of the significand as a fraction. Trailing zeros in the hexadecimal representation are removed unless all the digits are zero, in which case a single zero is used. Next, the exponent is represented by "p" followed by a decimal string of the unbiased exponent as if produced by a call to Integer.toString on the exponent value.
- If m is a float value with a subnormal representation, the significand is represented by the characters "0x0." followed by a hexadecimal representation of the rest of the significand as a fraction. Trailing zeros in the hexadecimal representation are removed. Next, the exponent is represented by "p-126". Note that there must be at least one nonzero digit in a subnormal significand.

Examples
Floating-point Value	Hexadecimal String
`1.0`	`0x1.0p0`
`-1.0`	`-0x1.0p0`
`2.0`	`0x1.0p1`
`3.0`	`0x1.8p1`
`0.5`	`0x1.0p-1`
`0.25`	`0x1.0p-2`
`Float.MAX_VALUE`	`0x1.fffffep127`
`Minimum Normal Value`	`0x1.0p-126`
`Maximum Subnormal Value`	`0x0.fffffep-126`
`Float.MIN_VALUE`	`0x0.000002p-126`

Parameters:: f - the float to be converted.
Returns:: a hex string representation of the argument.
Since:: 1.5

valueOf
```
public static Float valueOf(String s)
                     throws NumberFormatException
```
Returns a Float object holding the float value represented by the argument string s.
If s is null, then a NullPointerException is thrown.
Leading and trailing whitespace characters in s are ignored. Whitespace is removed as if by the String.trim() method; that is, both ASCII space and control characters are removed. The rest of s should constitute a FloatValue as described by the lexical syntax rules:

FloatValue:
Sign_opt NaN
Sign_opt Infinity
Sign_opt FloatingPointLiteral
Sign_opt HexFloatingPointLiteral
SignedInteger

HexFloatingPointLiteral:
HexSignificand BinaryExponent FloatTypeSuffix_opt

HexSignificand:
HexNumeral
HexNumeral .
0x HexDigits_opt . HexDigits
0X HexDigits_opt . HexDigits

BinaryExponent:
BinaryExponentIndicator SignedInteger

BinaryExponentIndicator:
p
P

where Sign, FloatingPointLiteral, HexNumeral, HexDigits, SignedInteger and FloatTypeSuffix are as defined in the lexical structure sections of The Java™ Language Specification, except that underscores are not accepted between digits. If s does not have the form of a FloatValue, then a NumberFormatException is thrown. Otherwise, s is regarded as representing an exact decimal value in the usual "computerized scientific notation" or as an exact hexadecimal value; this exact numerical value is then conceptually converted to an "infinitely precise" binary value that is then rounded to type float by the usual round-to-nearest rule of IEEE 754 floating-point arithmetic, which includes preserving the sign of a zero value. Note that the round-to-nearest rule also implies overflow and underflow behaviour; if the exact value of s is large enough in magnitude (greater than or equal to (MAX_VALUE + ulp(MAX_VALUE)/2), rounding to float will result in an infinity and if the exact value of s is small enough in magnitude (less than or equal to MIN_VALUE/2), rounding to float will result in a zero. Finally, after rounding a Float object representing this float value is returned.
To interpret localized string representations of a floating-point value, use subclasses of NumberFormat.
Note that trailing format specifiers, specifiers that determine the type of a floating-point literal (1.0f is a float value; 1.0d is a double value), do not influence the results of this method. In other words, the numerical value of the input string is converted directly to the target floating-point type. In general, the two-step sequence of conversions, string to double followed by double to float, is not equivalent to converting a string directly to float. For example, if first converted to an intermediate double and then to float, the string
"1.00000017881393421514957253748434595763683319091796875001d"
results in the float value 1.0000002f; if the string is converted directly to float, 1.0000001f results.
To avoid calling this method on an invalid string and having a NumberFormatException be thrown, the documentation for Double.valueOf lists a regular expression which can be used to screen the input.

Parameters:

s - the string to be parsed.

Returns:

a Float object holding the value represented by the String argument.

Throws:

NumberFormatException - if the string does not contain a parsable number.

valueOf
```
public static Float valueOf(float f)
```
Returns a Float instance representing the specified float value. If a new Float instance is not required, this method should generally be used in preference to the constructor Float(float), as this method is likely to yield significantly better space and time performance by caching frequently requested values.

Parameters:

f - a float value.

Returns:

a Float instance representing f.

Since:

1.5

parseFloat
```
public static float parseFloat(String s)
                        throws NumberFormatException
```
Returns a new float initialized to the value represented by the specified String, as performed by the valueOf method of class Float.

Parameters:

s - the string to be parsed.

Returns:

the float value represented by the string argument.

Throws:

NullPointerException - if the string is null

NumberFormatException - if the string does not contain a parsable float.

Since:

1.2

See Also:

valueOf(String)

isNaN
```
public static boolean isNaN(float v)
```
Returns true if the specified number is a Not-a-Number (NaN) value, false otherwise.

Parameters:

v - the value to be tested.

Returns:

true if the argument is NaN; false otherwise.

isInfinite
```
public static boolean isInfinite(float v)
```
Returns true if the specified number is infinitely large in magnitude, false otherwise.

Parameters:

v - the value to be tested.

Returns:

true if the argument is positive infinity or negative infinity; false otherwise.

isFinite
```
public static boolean isFinite(float f)
```
Returns true if the argument is a finite floating-point value; returns false otherwise (for NaN and infinity arguments).

Parameters:

f - the float value to be tested

Returns:

true if the argument is a finite floating-point value, false otherwise.

Since:

1.8

isNaN
```
public boolean isNaN()
```
Returns true if this Float value is a Not-a-Number (NaN), false otherwise.

Returns:

true if the value represented by this object is NaN; false otherwise.

isInfinite
```
public boolean isInfinite()
```
Returns true if this Float value is infinitely large in magnitude, false otherwise.

Returns:

true if the value represented by this object is positive infinity or negative infinity; false otherwise.

toString
```
public String toString()
```
Returns a string representation of this Float object. The primitive float value represented by this object is converted to a String exactly as if by the method toString of one argument.

Overrides:

toString in class Object

Returns:

a String representation of this object.

See Also:

toString(float)

byteValue
```
public byte byteValue()
```
Returns the value of this Float as a byte after a narrowing primitive conversion.

Overrides:

byteValue in class Number

Returns:

the float value represented by this object converted to type byte

See The Java™ Language Specification:

5.1.3 Narrowing Primitive Conversions

shortValue
```
public short shortValue()
```
Returns the value of this Float as a short after a narrowing primitive conversion.

Overrides:

shortValue in class Number

Returns:

the float value represented by this object converted to type short

Since:

1.1

See The Java™ Language Specification:

5.1.3 Narrowing Primitive Conversions

intValue
```
public int intValue()
```
Returns the value of this Float as an int after a narrowing primitive conversion.

Specified by:

intValue in class Number

Returns:

the float value represented by this object converted to type int

See The Java™ Language Specification:

5.1.3 Narrowing Primitive Conversions

longValue
```
public long longValue()
```
Returns value of this Float as a long after a narrowing primitive conversion.

Specified by:

longValue in class Number

Returns:

the float value represented by this object converted to type long

See The Java™ Language Specification:

5.1.3 Narrowing Primitive Conversions

floatValue
```
public float floatValue()
```
Returns the float value of this Float object.

Specified by:

floatValue in class Number

Returns:

the float value represented by this object

doubleValue
```
public double doubleValue()
```
Returns the value of this Float as a double after a widening primitive conversion.

Specified by:

doubleValue in class Number

Returns:

the float value represented by this object converted to type double

See The Java™ Language Specification:

5.1.2 Widening Primitive Conversions

hashCode
```
public int hashCode()
```
Returns a hash code for this Float object. The result is the integer bit representation, exactly as produced by the method floatToIntBits(float), of the primitive float value represented by this Float object.

Overrides:

hashCode in class Object

Returns:

a hash code value for this object.

See Also:

Object.equals(java.lang.Object), System.identityHashCode(java.lang.Object)

hashCode
```
public static int hashCode(float value)
```
Returns a hash code for a float value; compatible with Float.hashCode().

Parameters:

value - the value to hash

Returns:

a hash code value for a float value.

Since:

1.8

equals
```
public boolean equals(Object obj)
```
Compares this object against the specified object. The result is true if and only if the argument is not null and is a Float object that represents a float with the same value as the float represented by this object. For this purpose, two float values are considered to be the same if and only if the method floatToIntBits(float) returns the identical int value when applied to each.
Note that in most cases, for two instances of class Float, f1 and f2, the value of f1.equals(f2) is true if and only if
```
   f1.floatValue() == f2.floatValue()
 
```
also has the value true. However, there are two exceptions:
- If f1 and f2 both represent Float.NaN, then the equals method returns true, even though Float.NaN==Float.NaN has the value false.
- If f1 represents +0.0f while f2 represents -0.0f, or vice versa, the equal test has the value false, even though 0.0f==-0.0f has the value true.
This definition allows hash tables to operate properly.
Overrides:

equals in class Object

Parameters:

obj - the object to be compared

Returns:

true if the objects are the same; false otherwise.

See Also:

floatToIntBits(float)

floatToIntBits
```
public static int floatToIntBits(float value)
```
Returns a representation of the specified floating-point value according to the IEEE 754 floating-point "single format" bit layout.
Bit 31 (the bit that is selected by the mask 0x80000000) represents the sign of the floating-point number. Bits 30-23 (the bits that are selected by the mask 0x7f800000) represent the exponent. Bits 22-0 (the bits that are selected by the mask 0x007fffff) represent the significand (sometimes called the mantissa) of the floating-point number.
If the argument is positive infinity, the result is 0x7f800000.
If the argument is negative infinity, the result is 0xff800000.
If the argument is NaN, the result is 0x7fc00000.
In all cases, the result is an integer that, when given to the intBitsToFloat(int) method, will produce a floating-point value the same as the argument to floatToIntBits (except all NaN values are collapsed to a single "canonical" NaN value).

Parameters:

value - a floating-point number.

Returns:

the bits that represent the floating-point number.

floatToRawIntBits
```
public static int floatToRawIntBits(float value)
```
Returns a representation of the specified floating-point value according to the IEEE 754 floating-point "single format" bit layout, preserving Not-a-Number (NaN) values.
Bit 31 (the bit that is selected by the mask 0x80000000) represents the sign of the floating-point number. Bits 30-23 (the bits that are selected by the mask 0x7f800000) represent the exponent. Bits 22-0 (the bits that are selected by the mask 0x007fffff) represent the significand (sometimes called the mantissa) of the floating-point number.
If the argument is positive infinity, the result is 0x7f800000.
If the argument is negative infinity, the result is 0xff800000.
If the argument is NaN, the result is the integer representing the actual NaN value. Unlike the floatToIntBits method, floatToRawIntBits does not collapse all the bit patterns encoding a NaN to a single "canonical" NaN value.
In all cases, the result is an integer that, when given to the intBitsToFloat(int) method, will produce a floating-point value the same as the argument to floatToRawIntBits.

Parameters:

value - a floating-point number.

Returns:

the bits that represent the floating-point number.

Since:

1.3

intBitsToFloat
```
public static float intBitsToFloat(int bits)
```
Returns the float value corresponding to a given bit representation. The argument is considered to be a representation of a floating-point value according to the IEEE 754 floating-point "single format" bit layout.
If the argument is 0x7f800000, the result is positive infinity.
If the argument is 0xff800000, the result is negative infinity.
If the argument is any value in the range 0x7f800001 through 0x7fffffff or in the range 0xff800001 through 0xffffffff, the result is a NaN. No IEEE 754 floating-point operation provided by Java can distinguish between two NaN values of the same type with different bit patterns. Distinct values of NaN are only distinguishable by use of the Float.floatToRawIntBits method.
In all other cases, let s, e, and m be three values that can be computed from the argument:
```
 int s = ((bits >> 31) == 0) ? 1 : -1;
 int e = ((bits >> 23) & 0xff);
 int m = (e == 0) ?
                 (bits & 0x7fffff) << 1 :
                 (bits & 0x7fffff) | 0x800000;
 
```
Then the floating-point result equals the value of the mathematical expression s·m·2^e-150.
Note that this method may not be able to return a float NaN with exactly same bit pattern as the int argument. IEEE 754 distinguishes between two kinds of NaNs, quiet NaNs and signaling NaNs. The differences between the two kinds of NaN are generally not visible in Java. Arithmetic operations on signaling NaNs turn them into quiet NaNs with a different, but often similar, bit pattern. However, on some processors merely copying a signaling NaN also performs that conversion. In particular, copying a signaling NaN to return it to the calling method may perform this conversion. So intBitsToFloat may not be able to return a float with a signaling NaN bit pattern. Consequently, for some int values, floatToRawIntBits(intBitsToFloat(start)) may not equal start. Moreover, which particular bit patterns represent signaling NaNs is platform dependent; although all NaN bit patterns, quiet or signaling, must be in the NaN range identified above.
Parameters:

bits - an integer.

Returns:

the float floating-point value with the same bit pattern.

compareTo
```
public int compareTo(Float anotherFloat)
```
Compares two Float objects numerically. There are two ways in which comparisons performed by this method differ from those performed by the Java language numerical comparison operators (<, <=, ==, >=, >) when applied to primitive float values:
- Float.NaN is considered by this method to be equal to itself and greater than all other float values (including Float.POSITIVE_INFINITY).
- 0.0f is considered by this method to be greater than -0.0f.
This ensures that the natural ordering of Float objects imposed by this method is consistent with equals.
Specified by:

compareTo in interface Comparable<Float>

Parameters:

anotherFloat - the Float to be compared.

Returns:

the value 0 if anotherFloat is numerically equal to this Float; a value less than 0 if this Float is numerically less than anotherFloat; and a value greater than 0 if this Float is numerically greater than anotherFloat.

Since:

1.2

See Also:

Comparable.compareTo(Object)

compare
```
public static int compare(float f1,
                          float f2)
```
Compares the two specified float values. The sign of the integer value returned is the same as that of the integer that would be returned by the call:
```
    new Float(f1).compareTo(new Float(f2))
 
```
Parameters:

f1 - the first float to compare.

f2 - the second float to compare.

Returns:

the value 0 if f1 is numerically equal to f2; a value less than 0 if f1 is numerically less than f2; and a value greater than 0 if f1 is numerically greater than f2.

Since:

1.4

sum
```
public static float sum(float a,
                        float b)
```
Adds two float values together as per the + operator.

Parameters:

a - the first operand

b - the second operand

Returns:

the sum of a and b

Since:

1.8

See Also:

BinaryOperator

See The Java™ Language Specification:

4.2.4 Floating-Point Operations

max
```
public static float max(float a,
                        float b)
```
Returns the greater of two float values as if by calling Math.max.

Parameters:

a - the first operand

b - the second operand

Returns:

the greater of a and b

Since:

1.8

See Also:

BinaryOperator

min
```
public static float min(float a,
                        float b)
```
Returns the smaller of two float values as if by calling Math.min.

Parameters:

a - the first operand

b - the second operand

Returns:

the smaller of a and b

Since:

1.8

See Also:

BinaryOperator

Class Float

Field Summary

Constructor Summary

Method Summary

Methods declared in class java.lang.Object

Field Detail

POSITIVE_INFINITY

NEGATIVE_INFINITY

NaN

MAX_VALUE

MIN_NORMAL

MIN_VALUE

MAX_EXPONENT

MIN_EXPONENT

SIZE

BYTES

TYPE

Constructor Detail

Float

Float

Float

Method Detail

toString

toHexString

valueOf

valueOf

parseFloat

isNaN

isInfinite

isFinite

isNaN

isInfinite

toString

byteValue

shortValue

intValue

longValue

floatValue

doubleValue

hashCode

hashCode

equals

floatToIntBits

floatToRawIntBits

intBitsToFloat

compareTo

compare

sum

max

min