Module java.base

Package java.nio.channels

Defines channels, which represent connections to entities that are capable of performing I/O operations, such as files and sockets; defines selectors, for multiplexed, non-blocking I/O operations.
Lists channels and their descriptions
Channels Description
Channel A nexus for I/O operations
ReadableByteChannel Can read into a buffer
ScatteringByteChannel Can read into a sequence of buffers
WritableByteChannel Can write from a buffer
GatheringByteChannel Can write from a sequence of buffers
ByteChannel Can read/write to/from a buffer
SeekableByteChannel A ByteChannel connected to an entity that contains a variable-length sequence of bytes
AsynchronousChannel Supports asynchronous I/O operations.
AsynchronousByteChannel Can read and write bytes asynchronously
NetworkChannel A channel to a network socket
MulticastChannel Can join Internet Protocol (IP) multicast groups
Channels Utility methods for channel/stream interoperation

A channel represents an open connection to an entity such as a hardware device, a file, a network socket, or a program component that is capable of performing one or more distinct I/O operations, for example reading or writing. As specified in the Channel interface, channels are either open or closed, and they are both asynchronously closeable and interruptible.

The Channel interface is extended by several other interfaces.

The ReadableByteChannel interface specifies a read method that reads bytes from the channel into a buffer; similarly, the WritableByteChannel interface specifies a write method that writes bytes from a buffer to the channel. The ByteChannel interface unifies these two interfaces for the common case of channels that can both read and write bytes. The SeekableByteChannel interface extends the ByteChannel interface with methods to query and modify the channel's current position, and its size.

The ScatteringByteChannel and GatheringByteChannel interfaces extend the ReadableByteChannel and WritableByteChannel interfaces, respectively, adding read and write methods that take a sequence of buffers rather than a single buffer.

The NetworkChannel interface specifies methods to bind the channel's socket, obtain the address to which the socket is bound, and methods to get and set socket options. The MulticastChannel interface specifies methods to join Internet Protocol (IP) multicast groups.

The Channels utility class defines static methods that support the interoperation of the stream classes of the java.io package with the channel classes of this package. An appropriate channel can be constructed from an InputStream or an OutputStream, and conversely an InputStream or an OutputStream can be constructed from a channel. A Reader can be constructed that uses a given charset to decode bytes from a given readable byte channel, and conversely a Writer can be constructed that uses a given charset to encode characters into bytes and write them to a given writable byte channel.

Lists file channels and their descriptions
File channels Description
FileChannel Reads, writes, maps, and manipulates files
FileLock A lock on a (region of a) file
MappedByteBuffer A direct byte buffer mapped to a region of a file

The FileChannel class supports the usual operations of reading bytes from, and writing bytes to, a channel connected to a file, as well as those of querying and modifying the current file position and truncating the file to a specific size. It defines methods for acquiring locks on the whole file or on a specific region of a file; these methods return instances of the FileLock class. Finally, it defines methods for forcing updates to the file to be written to the storage device that contains it, for efficiently transferring bytes between the file and other channels, and for mapping a region of the file directly into memory.

A FileChannel is created by invoking one of its static open methods, or by invoking the getChannel method of a FileInputStream, FileOutputStream, or RandomAccessFile to return a file channel connected to the same underlying file as the java.io class.

Lists multiplexed, non-blocking channels and their descriptions
Multiplexed, non-blocking I/O Description
SelectableChannel A channel that can be multiplexed
DatagramChannel A channel to a datagram-oriented socket
Pipe.SinkChannel The write end of a pipe
Pipe.SourceChannel The read end of a pipe
ServerSocketChannel A channel to a stream-oriented listening socket
SocketChannel A channel for a stream-oriented connecting socket
Selector A multiplexor of selectable channels
SelectionKey A token representing the registration of a channel with a selector
Pipe Two channels that form a unidirectional pipe

Multiplexed, non-blocking I/O, which is much more scalable than thread-oriented, blocking I/O, is provided by selectors, selectable channels, and selection keys.

A selector is a multiplexor of selectable channels, which in turn are a special type of channel that can be put into non-blocking mode. To perform multiplexed I/O operations, one or more selectable channels are first created, put into non-blocking mode, and registered with a selector. Registering a channel specifies the set of I/O operations that will be tested for readiness by the selector, and returns a selection key that represents the registration.

Once some channels have been registered with a selector, a selection operation can be performed in order to discover which channels, if any, have become ready to perform one or more of the operations in which interest was previously declared. If a channel is ready then the key returned when it was registered will be added to the selector's selected-key set. The key set, and the keys within it, can be examined in order to determine the operations for which each channel is ready. From each key one can retrieve the corresponding channel in order to perform whatever I/O operations are required.

That a selection key indicates that its channel is ready for some operation is a hint, but not a guarantee, that such an operation can be performed by a thread without causing the thread to block. It is imperative that code that performs multiplexed I/O be written so as to ignore these hints when they prove to be incorrect.

This package defines selectable-channel classes corresponding to the DatagramSocket, ServerSocket, and Socket classes defined in the java.net package. Minor changes to these classes have been made in order to support sockets that are associated with channels. This package also defines a simple class that implements unidirectional pipes. In all cases, a new selectable channel is created by invoking the static open method of the corresponding class. If a channel needs an associated socket then a socket will be created as a side effect of this operation.

The implementation of selectors, selectable channels, and selection keys can be replaced by "plugging in" an alternative definition or instance of the SelectorProvider class defined in the java.nio.channels.spi package. It is not expected that many developers will actually make use of this facility; it is provided primarily so that sophisticated users can take advantage of operating-system-specific I/O-multiplexing mechanisms when very high performance is required.

Much of the bookkeeping and synchronization required to implement the multiplexed-I/O abstractions is performed by the AbstractInterruptibleChannel, AbstractSelectableChannel, AbstractSelectionKey, and AbstractSelector classes in the java.nio.channels.spi package. When defining a custom selector provider, only the AbstractSelector and AbstractSelectionKey classes should be subclassed directly; custom channel classes should extend the appropriate SelectableChannel subclasses defined in this package.

Lists asynchronous channels and their descriptions
Asynchronous I/O Description
AsynchronousFileChannel An asynchronous channel for reading, writing, and manipulating a file
AsynchronousSocketChannel An asynchronous channel to a stream-oriented connecting socket
AsynchronousServerSocketChannel An asynchronous channel to a stream-oriented listening socket
CompletionHandler A handler for consuming the result of an asynchronous operation
AsynchronousChannelGroup A grouping of asynchronous channels for the purpose of resource sharing

Asynchronous channels are a special type of channel capable of asynchronous I/O operations. Asynchronous channels are non-blocking and define methods to initiate asynchronous operations, returning a Future representing the pending result of each operation. The Future can be used to poll or wait for the result of the operation. Asynchronous I/O operations can also specify a CompletionHandler to invoke when the operation completes. A completion handler is user provided code that is executed to consume the result of I/O operation.

This package defines asynchronous-channel classes that are connected to a stream-oriented connecting or listening socket, or a datagram-oriented socket. It also defines the AsynchronousFileChannel class for asynchronous reading, writing, and manipulating a file. As with the FileChannel it supports operations to truncate the file to a specific size, force updates to the file to be written to the storage device, or acquire locks on the whole file or on a specific region of the file. Unlike the FileChannel it does not define methods for mapping a region of the file directly into memory. Where memory mapped I/O is required, then a FileChannel can be used.

Asynchronous channels are bound to an asynchronous channel group for the purpose of resource sharing. A group has an associated ExecutorService to which tasks are submitted to handle I/O events and dispatch to completion handlers that consume the result of asynchronous operations performed on channels in the group. The group can optionally be specified when creating the channel or the channel can be bound to a default group. Sophisticated users may wish to create their own asynchronous channel groups or configure the ExecutorService that will be used for the default group.

As with selectors, the implementation of asynchronous channels can be replaced by "plugging in" an alternative definition or instance of the AsynchronousChannelProvider class defined in the java.nio.channels.spi package. It is not expected that many developers will actually make use of this facility; it is provided primarily so that sophisticated users can take advantage of operating-system-specific asynchronous I/O mechanisms when very high performance is required.

Unless otherwise noted, passing a null argument to a constructor or method in any class or interface in this package will cause a NullPointerException to be thrown.

Since:
1.4