Module java.desktop
Package java.awt.event

Class MouseEvent

  • All Implemented Interfaces:
    Serializable
    Direct Known Subclasses:
    MenuDragMouseEvent, MouseWheelEvent
    public class MouseEvent
extends InputEvent
    An event which indicates that a mouse action occurred in a component. A mouse action is considered to occur in a particular component if and only if the mouse cursor is over the unobscured part of the component's bounds when the action happens. For lightweight components, such as Swing's components, mouse events are only dispatched to the component if the mouse event type has been enabled on the component. A mouse event type is enabled by adding the appropriate mouse-based EventListener to the component (MouseListener or MouseMotionListener), or by invoking Component.enableEvents(long) with the appropriate mask parameter (AWTEvent.MOUSE_EVENT_MASK or AWTEvent.MOUSE_MOTION_EVENT_MASK). If the mouse event type has not been enabled on the component, the corresponding mouse events are dispatched to the first ancestor that has enabled the mouse event type.

    For example, if a MouseListener has been added to a component, or enableEvents(AWTEvent.MOUSE_EVENT_MASK) has been invoked, then all the events defined by MouseListener are dispatched to the component. On the other hand, if a MouseMotionListener has not been added and enableEvents has not been invoked with AWTEvent.MOUSE_MOTION_EVENT_MASK, then mouse motion events are not dispatched to the component. Instead the mouse motion events are dispatched to the first ancestors that has enabled mouse motion events.

    This low-level event is generated by a component object for:

    • Mouse Events
      • a mouse button is pressed
      • a mouse button is released
      • a mouse button is clicked (pressed and released)
      • the mouse cursor enters the unobscured part of component's geometry
      • the mouse cursor exits the unobscured part of component's geometry
    • Mouse Motion Events
      • the mouse is moved
      • the mouse is dragged

    A MouseEvent object is passed to every MouseListener or MouseAdapter object which is registered to receive the "interesting" mouse events using the component's addMouseListener method. (MouseAdapter objects implement the MouseListener interface.) Each such listener object gets a MouseEvent containing the mouse event.

    A MouseEvent object is also passed to every MouseMotionListener or MouseMotionAdapter object which is registered to receive mouse motion events using the component's addMouseMotionListener method. (MouseMotionAdapter objects implement the MouseMotionListener interface.) Each such listener object gets a MouseEvent containing the mouse motion event.

    When a mouse button is clicked, events are generated and sent to the registered MouseListeners. The state of modal keys can be retrieved using InputEvent.getModifiers() and InputEvent.getModifiersEx(). The button mask returned by InputEvent.getModifiers() reflects only the button that changed state, not the current state of all buttons. (Note: Due to overlap in the values of ALT_MASK/BUTTON2_MASK and META_MASK/BUTTON3_MASK, this is not always true for mouse events involving modifier keys). To get the state of all buttons and modifier keys, use InputEvent.getModifiersEx(). The button which has changed state is returned by getButton()

    For example, if the first mouse button is pressed, events are sent in the following order: 

    
    id              modifiers    button
    MOUSE_PRESSED:  BUTTON1_MASK BUTTON1
    MOUSE_RELEASED: BUTTON1_MASK BUTTON1
    MOUSE_CLICKED:  BUTTON1_MASK BUTTON1
    When multiple mouse buttons are pressed, each press, release, and click results in a separate event.

    For example, if the user presses button 1 followed by button 2, and then releases them in the same order, the following sequence of events is generated: 

    
    id              modifiers    button
    MOUSE_PRESSED:  BUTTON1_MASK BUTTON1
    MOUSE_PRESSED:  BUTTON2_MASK BUTTON2
    MOUSE_RELEASED: BUTTON1_MASK BUTTON1
    MOUSE_CLICKED:  BUTTON1_MASK BUTTON1
    MOUSE_RELEASED: BUTTON2_MASK BUTTON2
    MOUSE_CLICKED:  BUTTON2_MASK BUTTON2
    If button 2 is released first, the MOUSE_RELEASED/MOUSE_CLICKED pair for BUTTON2_MASK arrives first, followed by the pair for BUTTON1_MASK.

    Some extra mouse buttons are added to extend the standard set of buttons represented by the following constants:BUTTON1, BUTTON2, and BUTTON3. Extra buttons have no assigned BUTTONx constants as well as their button masks have no assigned BUTTONx_DOWN_MASK constants. Nevertheless, ordinal numbers starting from 4 may be used as button numbers (button ids). Values obtained by the getMaskForButton(button) method may be used as button masks.

    MOUSE_DRAGGED events are delivered to the Component in which the mouse button was pressed until the mouse button is released (regardless of whether the mouse position is within the bounds of the Component). Due to platform-dependent Drag&Drop implementations, MOUSE_DRAGGED events may not be delivered during a native Drag&Drop operation. In a multi-screen environment mouse drag events are delivered to the Component even if the mouse position is outside the bounds of the GraphicsConfiguration associated with that Component. However, the reported position for mouse drag events in this case may differ from the actual mouse position:

    • In a multi-screen environment without a virtual device:
      The reported coordinates for mouse drag events are clipped to fit within the bounds of the GraphicsConfiguration associated with the Component.
    • In a multi-screen environment with a virtual device:
      The reported coordinates for mouse drag events are clipped to fit within the bounds of the virtual device associated with the Component.

    An unspecified behavior will be caused if the id parameter of any particular MouseEvent instance is not in the range from MOUSE_FIRST to MOUSE_LAST-1 (MOUSE_WHEEL is not acceptable).

    Since:
    1.1
    See Also:
    MouseAdapter, MouseListener, MouseMotionAdapter, MouseMotionListener, MouseWheelListener, Tutorial: Writing a Mouse Listener, Tutorial: Writing a Mouse Motion Listener, Serialized Form

    • Field Detail

      • MOUSE_FIRST

        public static final int MOUSE_FIRST
        The first number in the range of ids used for mouse events.
        See Also:
        Constant Field Values

      • MOUSE_LAST

        public static final int MOUSE_LAST
        The last number in the range of ids used for mouse events.
        See Also:
        Constant Field Values

      • MOUSE_CLICKED

        public static final int MOUSE_CLICKED
        The "mouse clicked" event. This MouseEvent occurs when a mouse button is pressed and released.
        See Also:
        Constant Field Values

      • MOUSE_PRESSED

        public static final int MOUSE_PRESSED
        The "mouse pressed" event. This MouseEvent occurs when a mouse button is pushed down.
        See Also:
        Constant Field Values

      • MOUSE_RELEASED

        public static final int MOUSE_RELEASED
        The "mouse released" event. This MouseEvent occurs when a mouse button is let up.
        See Also:
        Constant Field Values

      • MOUSE_MOVED

        public static final int MOUSE_MOVED
        The "mouse moved" event. This MouseEvent occurs when the mouse position changes.
        See Also:
        Constant Field Values

      • MOUSE_ENTERED

        public static final int MOUSE_ENTERED
        The "mouse entered" event. This MouseEvent occurs when the mouse cursor enters the unobscured part of component's geometry.
        See Also:
        Constant Field Values

      • MOUSE_EXITED

        public static final int MOUSE_EXITED
        The "mouse exited" event. This MouseEvent occurs when the mouse cursor exits the unobscured part of component's geometry.
        See Also:
        Constant Field Values

      • MOUSE_DRAGGED

        public static final int MOUSE_DRAGGED
        The "mouse dragged" event. This MouseEvent occurs when the mouse position changes while a mouse button is pressed.
        See Also:
        Constant Field Values

      • MOUSE_WHEEL

        public static final int MOUSE_WHEEL
        The "mouse wheel" event. This is the only MouseWheelEvent. It occurs when a mouse equipped with a wheel has its wheel rotated.
        Since:
        1.4
        See Also:
        Constant Field Values

    • Constructor Detail

      • MouseEvent

        public MouseEvent​(Component source,
                  int id,
                  long when,
                  int modifiers,
                  int x,
                  int y,
                  int clickCount,
                  boolean popupTrigger,
                  int button)
        Constructs a MouseEvent object with the specified source component, type, time, modifiers, coordinates, click count, popupTrigger flag, and button number.

        Creating an invalid event (such as by using more than one of the old _MASKs, or modifier/button values which don't match) results in unspecified behavior. An invocation of the form MouseEvent(source, id, when, modifiers, x, y, clickCount, popupTrigger, button) behaves in exactly the same way as the invocation MouseEvent(source, id, when, modifiers, x, y, xAbs, yAbs, clickCount, popupTrigger, button) where xAbs and yAbs defines as source's location on screen plus relative coordinates x and y. xAbs and yAbs are set to zero if the source is not showing. This method throws an IllegalArgumentException if source is null.

        Parameters:
        source - The Component that originated the event
        id - An integer indicating the type of event. For information on allowable values, see the class description for MouseEvent
        when - A long integer that gives the time the event occurred. Passing negative or zero value is not recommended
        modifiers - a modifier mask describing the modifier keys and mouse buttons (for example, shift, ctrl, alt, and meta) that are down during the event. Only extended modifiers are allowed to be used as a value for this parameter (see the InputEvent.getModifiersEx() class for the description of extended modifiers). Passing negative parameter is not recommended. Zero value means that no modifiers were passed
        x - The horizontal x coordinate for the mouse location. It is allowed to pass negative values
        y - The vertical y coordinate for the mouse location. It is allowed to pass negative values
        clickCount - The number of mouse clicks associated with event. Passing negative value is not recommended
        popupTrigger - A boolean that equals true if this event is a trigger for a popup menu
        button - An integer that indicates, which of the mouse buttons has changed its state. The following rules are applied to this parameter:
        • If support for the extended mouse buttons is disabled by Java then it is allowed to create MouseEvent objects only with the standard buttons: NOBUTTON, BUTTON1, BUTTON2, and BUTTON3.
        • If support for the extended mouse buttons is enabled by Java then it is allowed to create MouseEvent objects with the standard buttons. In case the support for extended mouse buttons is enabled by Java, then in addition to the standard buttons, MouseEvent objects can be created using buttons from the range starting from 4 to MouseInfo.getNumberOfButtons() if the mouse has more than three buttons.
        Throws:
        IllegalArgumentException - if button is less than zero
        IllegalArgumentException - if source is null
        IllegalArgumentException - if button is greater than BUTTON3 and the support for extended mouse buttons is disabled by Java
        IllegalArgumentException - if button is greater than the current number of buttons and the support for extended mouse buttons is enabled by Java
        IllegalArgumentException - if an invalid button value is passed in
        IllegalArgumentException - if source is null
        Since:
        1.4
        See Also:
        EventObject.getSource(), AWTEvent.getID(), InputEvent.getWhen(), InputEvent.getModifiers(), getX(), getY(), getClickCount(), isPopupTrigger(), getButton()

      • MouseEvent

        public MouseEvent​(Component source,
                  int id,
                  long when,
                  int modifiers,
                  int x,
                  int y,
                  int clickCount,
                  boolean popupTrigger)
        Constructs a MouseEvent object with the specified source component, type, modifiers, coordinates, click count, and popupTrigger flag. An invocation of the form MouseEvent(source, id, when, modifiers, x, y, clickCount, popupTrigger) behaves in exactly the same way as the invocation MouseEvent(source, id, when, modifiers, x, y, xAbs, yAbs, clickCount, popupTrigger, MouseEvent.NOBUTTON) where xAbs and yAbs defines as source's location on screen plus relative coordinates x and y. xAbs and yAbs are set to zero if the source is not showing. This method throws an IllegalArgumentException if source is null.
        Parameters:
        source - The Component that originated the event
        id - An integer indicating the type of event. For information on allowable values, see the class description for MouseEvent
        when - A long integer that gives the time the event occurred. Passing negative or zero value is not recommended
        modifiers - a modifier mask describing the modifier keys and mouse buttons (for example, shift, ctrl, alt, and meta) that are down during the event. Only extended modifiers are allowed to be used as a value for this parameter (see the InputEvent.getModifiersEx() class for the description of extended modifiers). Passing negative parameter is not recommended. Zero value means that no modifiers were passed
        x - The horizontal x coordinate for the mouse location. It is allowed to pass negative values
        y - The vertical y coordinate for the mouse location. It is allowed to pass negative values
        clickCount - The number of mouse clicks associated with event. Passing negative value is not recommended
        popupTrigger - A boolean that equals true if this event is a trigger for a popup menu
        Throws:
        IllegalArgumentException - if source is null
        See Also:
        EventObject.getSource(), AWTEvent.getID(), InputEvent.getWhen(), InputEvent.getModifiers(), getX(), getY(), getClickCount(), isPopupTrigger()

      • MouseEvent

        public MouseEvent​(Component source,
                  int id,
                  long when,
                  int modifiers,
                  int x,
                  int y,
                  int xAbs,
                  int yAbs,
                  int clickCount,
                  boolean popupTrigger,
                  int button)
        Constructs a MouseEvent object with the specified source component, type, time, modifiers, coordinates, absolute coordinates, click count, popupTrigger flag, and button number.

        Creating an invalid event (such as by using more than one of the old _MASKs, or modifier/button values which don't match) results in unspecified behavior. Even if inconsistent values for relative and absolute coordinates are passed to the constructor, the mouse event instance is still created and no exception is thrown. This method throws an IllegalArgumentException if source is null.

        Parameters:
        source - The Component that originated the event
        id - An integer indicating the type of event. For information on allowable values, see the class description for MouseEvent
        when - A long integer that gives the time the event occurred. Passing negative or zero value is not recommended
        modifiers - a modifier mask describing the modifier keys and mouse buttons (for example, shift, ctrl, alt, and meta) that are down during the event. Only extended modifiers are allowed to be used as a value for this parameter (see the InputEvent.getModifiersEx() class for the description of extended modifiers). Passing negative parameter is not recommended. Zero value means that no modifiers were passed
        x - The horizontal x coordinate for the mouse location. It is allowed to pass negative values
        y - The vertical y coordinate for the mouse location. It is allowed to pass negative values
        xAbs - The absolute horizontal x coordinate for the mouse location It is allowed to pass negative values
        yAbs - The absolute vertical y coordinate for the mouse location It is allowed to pass negative values
        clickCount - The number of mouse clicks associated with event. Passing negative value is not recommended
        popupTrigger - A boolean that equals true if this event is a trigger for a popup menu
        button - An integer that indicates, which of the mouse buttons has changed its state. The following rules are applied to this parameter:
        • If support for the extended mouse buttons is disabled by Java then it is allowed to create MouseEvent objects only with the standard buttons: NOBUTTON, BUTTON1, BUTTON2, and BUTTON3.
        • If support for the extended mouse buttons is enabled by Java then it is allowed to create MouseEvent objects with the standard buttons. In case the support for extended mouse buttons is enabled by Java, then in addition to the standard buttons, MouseEvent objects can be created using buttons from the range starting from 4 to MouseInfo.getNumberOfButtons() if the mouse has more than three buttons.
        Throws:
        IllegalArgumentException - if button is less than zero
        IllegalArgumentException - if source is null
        IllegalArgumentException - if button is greater than BUTTON3 and the support for extended mouse buttons is disabled by Java
        IllegalArgumentException - if button is greater than the current number of buttons and the support for extended mouse buttons is enabled by Java
        IllegalArgumentException - if an invalid button value is passed in
        IllegalArgumentException - if source is null
        Since:
        1.6
        See Also:
        EventObject.getSource(), AWTEvent.getID(), InputEvent.getWhen(), InputEvent.getModifiers(), getX(), getY(), getXOnScreen(), getYOnScreen(), getClickCount(), isPopupTrigger(), getButton(), Toolkit.areExtraMouseButtonsEnabled(), MouseInfo.getNumberOfButtons(), InputEvent.getMaskForButton(int)

    • Method Detail

      • getLocationOnScreen

        public Point getLocationOnScreen()
        Returns the absolute x, y position of the event. In a virtual device multi-screen environment in which the desktop area could span multiple physical screen devices, these coordinates are relative to the virtual coordinate system. Otherwise, these coordinates are relative to the coordinate system associated with the Component's GraphicsConfiguration.
        Returns:
        a Point object containing the absolute x and y coordinates.
        Since:
        1.6
        See Also:
        GraphicsConfiguration

      • getXOnScreen

        public int getXOnScreen()
        Returns the absolute horizontal x position of the event. In a virtual device multi-screen environment in which the desktop area could span multiple physical screen devices, this coordinate is relative to the virtual coordinate system. Otherwise, this coordinate is relative to the coordinate system associated with the Component's GraphicsConfiguration.
        Returns:
        x an integer indicating absolute horizontal position.
        Since:
        1.6
        See Also:
        GraphicsConfiguration

      • getYOnScreen

        public int getYOnScreen()
        Returns the absolute vertical y position of the event. In a virtual device multi-screen environment in which the desktop area could span multiple physical screen devices, this coordinate is relative to the virtual coordinate system. Otherwise, this coordinate is relative to the coordinate system associated with the Component's GraphicsConfiguration.
        Returns:
        y an integer indicating absolute vertical position.
        Since:
        1.6
        See Also:
        GraphicsConfiguration

      • getX

        public int getX()
        Returns the horizontal x position of the event relative to the source component.
        Returns:
        x an integer indicating horizontal position relative to the component

      • getY

        public int getY()
        Returns the vertical y position of the event relative to the source component.
        Returns:
        y an integer indicating vertical position relative to the component

      • getPoint

        public Point getPoint()
        Returns the x,y position of the event relative to the source component.
        Returns:
        a Point object containing the x and y coordinates relative to the source component

      • translatePoint

        public void translatePoint​(int x,
                           int y)
        Translates the event's coordinates to a new position by adding specified x (horizontal) and y (vertical) offsets.
        Parameters:
        x - the horizontal x value to add to the current x coordinate position
        y - the vertical y value to add to the current y coordinate position

      • getClickCount

        public int getClickCount()
        Returns the number of mouse clicks associated with this event.
        Returns:
        integer value for the number of clicks

      • getButton

        public int getButton()
        Returns which, if any, of the mouse buttons has changed state. The returned value is ranged from 0 to the MouseInfo.getNumberOfButtons() value. The returned value includes at least the following constants:
        • NOBUTTON
        • BUTTON1
        • BUTTON2
        • BUTTON3
        It is allowed to use those constants to compare with the returned button number in the application. For example, 
         if (anEvent.getButton() == MouseEvent.BUTTON1) {
        In particular, for a mouse with one, two, or three buttons this method may return the following values:
        • 0 (NOBUTTON)
        • 1 (BUTTON1)
        • 2 (BUTTON2)
        • 3 (BUTTON3)
        Button numbers greater than BUTTON3 have no constant identifier. So if a mouse with five buttons is installed, this method may return the following values:
        • 0 (NOBUTTON)
        • 1 (BUTTON1)
        • 2 (BUTTON2)
        • 3 (BUTTON3)
        • 4
        • 5

        Note: If support for extended mouse buttons is disabled by Java then the AWT event subsystem does not produce mouse events for the extended mouse buttons. So it is not expected that this method returns anything except NOBUTTON, BUTTON1, BUTTON2, BUTTON3.

        Returns:
        one of the values from 0 to MouseInfo.getNumberOfButtons() if support for the extended mouse buttons is enabled by Java. That range includes NOBUTTON, BUTTON1, BUTTON2, BUTTON3;
        NOBUTTON, BUTTON1, BUTTON2 or BUTTON3 if support for the extended mouse buttons is disabled by Java
        Since:
        1.4
        See Also:
        Toolkit.areExtraMouseButtonsEnabled(), MouseInfo.getNumberOfButtons(), MouseEvent(Component, int, long, int, int, int, int, int, int, boolean, int), InputEvent.getMaskForButton(int)

      • isPopupTrigger

        public boolean isPopupTrigger()
        Returns whether or not this mouse event is the popup menu trigger event for the platform.

        Note: Popup menus are triggered differently on different systems. Therefore, isPopupTrigger should be checked in both mousePressed and mouseReleased for proper cross-platform functionality.

        Returns:
        boolean, true if this event is the popup menu trigger for this platform

      • getMouseModifiersText

        public static String getMouseModifiersText​(int modifiers)
        Returns a String instance describing the modifier keys and mouse buttons that were down during the event, such as "Shift", or "Ctrl+Shift". These strings can be localized by changing the awt.properties file.

        Note that the InputEvent.ALT_MASK and InputEvent.BUTTON2_MASK have equal values, so the "Alt" string is returned for both modifiers. Likewise, the InputEvent.META_MASK and InputEvent.BUTTON3_MASK have equal values, so the "Meta" string is returned for both modifiers.

        Note that passing negative parameter is incorrect, and will cause the returning an unspecified string. Zero parameter means that no modifiers were passed and will cause the returning an empty string.

        Parameters:
        modifiers - A modifier mask describing the modifier keys and mouse buttons that were down during the event
        Returns:
        string string text description of the combination of modifier keys and mouse buttons that were down during the event
        Since:
        1.4
        See Also:
        InputEvent.getModifiersExText(int)

      • paramString

        public String paramString()
        Returns a parameter string identifying this event. This method is useful for event-logging and for debugging.
        Overrides:
        paramString in class ComponentEvent
        Returns:
        a string identifying the event and its attributes