Module java.desktop

Package java.awt.geom

Class Path2D.Float

java.lang.Object

java.awt.geom.Path2D

java.awt.geom.Path2D.Float

All Implemented Interfaces:

Shape, Serializable, Cloneable

Direct Known Subclasses:

GeneralPath

Enclosing class:

Path2D

public static class Path2D.Float
extends Path2D
implements Serializable

The Float class defines a geometric path with coordinates stored in single precision floating point.

Since:

1.6

See Also:

Serialized Form

Nested Class Summary

Nested classes/interfaces declared in class java.awt.geom.Path2D

Path2D.Double, Path2D.Float

Field Summary

Fields declared in class java.awt.geom.Path2D

WIND_EVEN_ODD, WIND_NON_ZERO

Constructor Summary

Constructors

Constructor	Description
Float()	Constructs a new empty single precision Path2D object with a default winding rule of Path2D.WIND_NON_ZERO.
Float(int rule)	Constructs a new empty single precision Path2D object with the specified winding rule to control operations that require the interior of the path to be defined.
Float(int rule, int initialCapacity)	Constructs a new empty single precision Path2D object with the specified winding rule and the specified initial capacity to store path segments.
Float(Shape s)	Constructs a new single precision Path2D object from an arbitrary Shape object.
Float(Shape s, AffineTransform at)	Constructs a new single precision Path2D object from an arbitrary Shape object, transformed by an AffineTransform object.

Method Summary

Modifier and Type	Method	Description
void	append(PathIterator pi, boolean connect)	Appends the geometry of the specified PathIterator object to the path, possibly connecting the new geometry to the existing path segments with a line segment.
Object	clone()	Creates a new object of the same class as this object.
void	curveTo(double x1, double y1, double x2, double y2, double x3, double y3)	Adds a curved segment, defined by three new points, to the path by drawing a Bézier curve that intersects both the current coordinates and the specified coordinates (x3,y3), using the specified points (x1,y1) and (x2,y2) as Bézier control points.
void	curveTo(float x1, float y1, float x2, float y2, float x3, float y3)	Adds a curved segment, defined by three new points, to the path by drawing a Bézier curve that intersects both the current coordinates and the specified coordinates (x3,y3), using the specified points (x1,y1) and (x2,y2) as Bézier control points.
Rectangle2D	getBounds2D()	Returns a high precision and more accurate bounding box of the Shape than the getBounds method.
PathIterator	getPathIterator(AffineTransform at)	Returns an iterator object that iterates along the Shape boundary and provides access to the geometry of the Shape outline.
void	lineTo(double x, double y)	Adds a point to the path by drawing a straight line from the current coordinates to the new specified coordinates specified in double precision.
void	lineTo(float x, float y)	Adds a point to the path by drawing a straight line from the current coordinates to the new specified coordinates specified in float precision.
void	moveTo(double x, double y)	Adds a point to the path by moving to the specified coordinates specified in double precision.
void	moveTo(float x, float y)	Adds a point to the path by moving to the specified coordinates specified in float precision.
void	quadTo(double x1, double y1, double x2, double y2)	Adds a curved segment, defined by two new points, to the path by drawing a Quadratic curve that intersects both the current coordinates and the specified coordinates (x2,y2), using the specified point (x1,y1) as a quadratic parametric control point.
void	quadTo(float x1, float y1, float x2, float y2)	Adds a curved segment, defined by two new points, to the path by drawing a Quadratic curve that intersects both the current coordinates and the specified coordinates (x2,y2), using the specified point (x1,y1) as a quadratic parametric control point.
void	transform(AffineTransform at)	Transforms the geometry of this path using the specified AffineTransform.

Methods declared in class java.awt.geom.Path2D

append, closePath, contains, contains, contains, contains, contains, contains, contains, contains, createTransformedShape, getBounds, getCurrentPoint, getPathIterator, getWindingRule, intersects, intersects, intersects, intersects, reset, setWindingRule, trimToSize

Methods declared in class java.lang.Object

equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Constructor Detail

Float

public Float()

Constructs a new empty single precision Path2D object with a default winding rule of Path2D.WIND_NON_ZERO.

Since:

1.6

Float

public Float(int rule)

Constructs a new empty single precision Path2D object with the specified winding rule to control operations that require the interior of the path to be defined.

Parameters:

rule - the winding rule

Since:

1.6

See Also:

Path2D.WIND_EVEN_ODD, Path2D.WIND_NON_ZERO

Float

public Float(int rule,
             int initialCapacity)

Constructs a new empty single precision Path2D object with the specified winding rule and the specified initial capacity to store path segments. This number is an initial guess as to how many path segments will be added to the path, but the storage is expanded as needed to store whatever path segments are added.

Parameters:

rule - the winding rule

initialCapacity - the estimate for the number of path segments in the path

Since:

1.6

See Also:

Path2D.WIND_EVEN_ODD, Path2D.WIND_NON_ZERO

Float

public Float(Shape s)

Constructs a new single precision Path2D object from an arbitrary Shape object. All of the initial geometry and the winding rule for this path are taken from the specified Shape object.

Parameters:

s - the specified Shape object

Since:

1.6

Float

public Float(Shape s,
             AffineTransform at)

Constructs a new single precision Path2D object from an arbitrary Shape object, transformed by an AffineTransform object. All of the initial geometry and the winding rule for this path are taken from the specified Shape object and transformed by the specified AffineTransform object.

Parameters:

s - the specified Shape object

at - the specified AffineTransform object

Since:

1.6

Method Detail

moveTo

public final void moveTo(double x,
                         double y)

Adds a point to the path by moving to the specified coordinates specified in double precision.

Specified by:

moveTo in class Path2D

Parameters:

x - the specified X coordinate

y - the specified Y coordinate

Since:

1.6

moveTo

public final void moveTo(float x,
                         float y)

Adds a point to the path by moving to the specified coordinates specified in float precision.

This method provides a single precision variant of the double precision moveTo() method on the base Path2D class.

Parameters:

x - the specified X coordinate

y - the specified Y coordinate

Since:

1.6

See Also:

Path2D.moveTo(double, double)

lineTo

public final void lineTo(double x,
                         double y)

Adds a point to the path by drawing a straight line from the current coordinates to the new specified coordinates specified in double precision.

Specified by:

lineTo in class Path2D

Parameters:

x - the specified X coordinate

y - the specified Y coordinate

Since:

1.6

lineTo

public final void lineTo(float x,
                         float y)

Adds a point to the path by drawing a straight line from the current coordinates to the new specified coordinates specified in float precision.

This method provides a single precision variant of the double precision lineTo() method on the base Path2D class.

Parameters:

x - the specified X coordinate

y - the specified Y coordinate

Since:

1.6

See Also:

Path2D.lineTo(double, double)

quadTo

public final void quadTo(double x1,
                         double y1,
                         double x2,
                         double y2)

Adds a curved segment, defined by two new points, to the path by drawing a Quadratic curve that intersects both the current coordinates and the specified coordinates (x2,y2), using the specified point (x1,y1) as a quadratic parametric control point. All coordinates are specified in double precision.

Specified by:

quadTo in class Path2D

Parameters:

x1 - the X coordinate of the quadratic control point

y1 - the Y coordinate of the quadratic control point

x2 - the X coordinate of the final end point

y2 - the Y coordinate of the final end point

Since:

1.6

quadTo

public final void quadTo(float x1,
                         float y1,
                         float x2,
                         float y2)

Adds a curved segment, defined by two new points, to the path by drawing a Quadratic curve that intersects both the current coordinates and the specified coordinates (x2,y2), using the specified point (x1,y1) as a quadratic parametric control point. All coordinates are specified in float precision.

This method provides a single precision variant of the double precision quadTo() method on the base Path2D class.

Parameters:

x1 - the X coordinate of the quadratic control point

y1 - the Y coordinate of the quadratic control point

x2 - the X coordinate of the final end point

y2 - the Y coordinate of the final end point

Since:

1.6

See Also:

Path2D.quadTo(double, double, double, double)

curveTo

public final void curveTo(double x1,
                          double y1,
                          double x2,
                          double y2,
                          double x3,
                          double y3)

Adds a curved segment, defined by three new points, to the path by drawing a Bézier curve that intersects both the current coordinates and the specified coordinates (x3,y3), using the specified points (x1,y1) and (x2,y2) as Bézier control points. All coordinates are specified in double precision.

Specified by:

curveTo in class Path2D

Parameters:

x1 - the X coordinate of the first Bézier control point

y1 - the Y coordinate of the first Bézier control point

x2 - the X coordinate of the second Bézier control point

y2 - the Y coordinate of the second Bézier control point

x3 - the X coordinate of the final end point

y3 - the Y coordinate of the final end point

Since:

1.6

curveTo

public final void curveTo(float x1,
                          float y1,
                          float x2,
                          float y2,
                          float x3,
                          float y3)

Adds a curved segment, defined by three new points, to the path by drawing a Bézier curve that intersects both the current coordinates and the specified coordinates (x3,y3), using the specified points (x1,y1) and (x2,y2) as Bézier control points. All coordinates are specified in float precision.

This method provides a single precision variant of the double precision curveTo() method on the base Path2D class.

Parameters:

x1 - the X coordinate of the first Bézier control point

y1 - the Y coordinate of the first Bézier control point

x2 - the X coordinate of the second Bézier control point

y2 - the Y coordinate of the second Bézier control point

x3 - the X coordinate of the final end point

y3 - the Y coordinate of the final end point

Since:

1.6

See Also:

Path2D.curveTo(double, double, double, double, double, double)

append

public final void append(PathIterator pi,
                         boolean connect)

Appends the geometry of the specified PathIterator object to the path, possibly connecting the new geometry to the existing path segments with a line segment. If the connect parameter is true and the path is not empty then any initial moveTo in the geometry of the appended Shape is turned into a lineTo segment. If the destination coordinates of such a connecting lineTo segment match the ending coordinates of a currently open subpath then the segment is omitted as superfluous. The winding rule of the specified Shape is ignored and the appended geometry is governed by the winding rule specified for this path.

Specified by:

append in class Path2D

Parameters:

pi - the PathIterator whose geometry is appended to this path

connect - a boolean to control whether or not to turn an initial moveTo segment into a lineTo segment to connect the new geometry to the existing path

Since:

1.6

transform

public final void transform(AffineTransform at)

Transforms the geometry of this path using the specified AffineTransform. The geometry is transformed in place, which permanently changes the boundary defined by this object.

Specified by:

transform in class Path2D

Parameters:

at - the AffineTransform used to transform the area

Since:

1.6

getBounds2D

public final Rectangle2D getBounds2D()

Returns a high precision and more accurate bounding box of the Shape than the getBounds method. Note that there is no guarantee that the returned Rectangle2D is the smallest bounding box that encloses the Shape, only that the Shape lies entirely within the indicated Rectangle2D. The bounding box returned by this method is usually tighter than that returned by the getBounds method and never fails due to overflow problems since the return value can be an instance of the Rectangle2D that uses double precision values to store the dimensions.

Note that the definition of insideness can lead to situations where points on the defining outline of the shape may not be considered contained in the returned bounds object, but only in cases where those points are also not considered contained in the original shape.

If a point is inside the shape according to the contains(point) method, then it must be inside the returned Rectangle2D bounds object according to the contains(point) method of the bounds. Specifically:

shape.contains(p) requires bounds.contains(p)

If a point is not inside the shape, then it might still be contained in the bounds object:

bounds.contains(p) does not imply shape.contains(p)

Specified by:

getBounds2D in interface Shape

Returns:

an instance of Rectangle2D that is a high-precision bounding box of the Shape.

Since:

1.6

See Also:

Shape.getBounds()

getPathIterator

public final PathIterator getPathIterator(AffineTransform at)

Returns an iterator object that iterates along the Shape boundary and provides access to the geometry of the Shape outline. If an optional AffineTransform is specified, the coordinates returned in the iteration are transformed accordingly.

Each call to this method returns a fresh PathIterator object that traverses the geometry of the Shape object independently from any other PathIterator objects in use at the same time.

It is recommended, but not guaranteed, that objects implementing the Shape interface isolate iterations that are in process from any changes that might occur to the original object's geometry during such iterations.

The iterator for this class is not multi-threaded safe, which means that the Path2D class does not guarantee that modifications to the geometry of this Path2D object do not affect any iterations of that geometry that are already in process.

Specified by:

getPathIterator in interface Shape

Parameters:

at - an optional AffineTransform to be applied to the coordinates as they are returned in the iteration, or null if untransformed coordinates are desired

Returns:

a new PathIterator object, which independently traverses the geometry of the Shape.

Since:

1.6

clone

public final Object clone()

Creates a new object of the same class as this object.

Specified by:

clone in class Path2D

Returns:

a clone of this instance.

Throws:

OutOfMemoryError - if there is not enough memory.

Since:

1.6

See Also:

Cloneable