java.lang.Object
- java.awt.image.renderable.ParameterBlock

All Implemented Interfaces:

Serializable, Cloneable
```
public class ParameterBlock
extends Object
implements Cloneable, Serializable
```
A ParameterBlock encapsulates all the information about sources and parameters (Objects) required by a RenderableImageOp, or other classes that process images.
Although it is possible to place arbitrary objects in the source Vector, users of this class may impose semantic constraints such as requiring all sources to be RenderedImages or RenderableImage. ParameterBlock itself is merely a container and performs no checking on source or parameter types.
All parameters in a ParameterBlock are objects; convenience add and set methods are available that take arguments of base type and construct the appropriate subclass of Number (such as Integer or Float). Corresponding get methods perform a downward cast and have return values of base type; an exception will be thrown if the stored values do not have the correct type. There is no way to distinguish between the results of "short s; add(s)" and "add(new Short(s))".
Note that the get and set methods operate on references. Therefore, one must be careful not to share references between ParameterBlocks when this is inappropriate. For example, to create a new ParameterBlock that is equal to an old one except for an added source, one might be tempted to write:
```
 ParameterBlock addSource(ParameterBlock pb, RenderableImage im) {
     ParameterBlock pb1 = new ParameterBlock(pb.getSources());
     pb1.addSource(im);
     return pb1;
 }
 
```
This code will have the side effect of altering the original ParameterBlock, since the getSources operation returned a reference to its source Vector. Both pb and pb1 share their source Vector, and a change in either is visible to both.
A correct way to write the addSource function is to clone the source Vector:
```
 ParameterBlock addSource (ParameterBlock pb, RenderableImage im) {
     ParameterBlock pb1 = new ParameterBlock(pb.getSources().clone());
     pb1.addSource(im);
     return pb1;
 }
 
```
The clone method of ParameterBlock has been defined to perform a clone of both the source and parameter Vectors for this reason. A standard, shallow clone is available as shallowClone.
The addSource, setSource, add, and set methods are defined to return 'this' after adding their argument. This allows use of syntax like:
```
 ParameterBlock pb = new ParameterBlock();
 op = new RenderableImageOp("operation", pb.add(arg1).add(arg2));
 
```
See Also:

Serialized Form

Field Summary

Fields
Modifier and Type	Field	Description
`protected Vector<Object>`	`parameters`	A Vector of non-source parameters, stored as arbitrary Objects.
`protected Vector<Object>`	`sources`	A Vector of sources, stored as arbitrary Objects.

Constructor Summary

Constructors
Constructor	Description
`ParameterBlock()`	A dummy constructor.
`ParameterBlock(Vector<Object> sources)`	Constructs a `ParameterBlock` with a given Vector of sources.
`ParameterBlock(Vector<Object> sources, Vector<Object> parameters)`	Constructs a `ParameterBlock` with a given Vector of sources and Vector of parameters.

Method Summary

All Methods Instance Methods Concrete Methods
Modifier and Type	Method	Description
`ParameterBlock`	`add(byte b)`	Adds a Byte to the list of parameters.
`ParameterBlock`	`add(char c)`	Adds a Character to the list of parameters.
`ParameterBlock`	`add(double d)`	Adds a Double to the list of parameters.
`ParameterBlock`	`add(float f)`	Adds a Float to the list of parameters.
`ParameterBlock`	`add(int i)`	Adds a Integer to the list of parameters.
`ParameterBlock`	`add(long l)`	Adds a Long to the list of parameters.
`ParameterBlock`	`add(short s)`	Adds a Short to the list of parameters.
`ParameterBlock`	`add(Object obj)`	Adds an object to the list of parameters.
`ParameterBlock`	`addSource(Object source)`	Adds an image to end of the list of sources.
`Object`	`clone()`	Creates a copy of a `ParameterBlock`.
`byte`	`getByteParameter(int index)`	A convenience method to return a parameter as a byte.
`char`	`getCharParameter(int index)`	A convenience method to return a parameter as a char.
`double`	`getDoubleParameter(int index)`	A convenience method to return a parameter as a double.
`float`	`getFloatParameter(int index)`	A convenience method to return a parameter as a float.
`int`	`getIntParameter(int index)`	A convenience method to return a parameter as an int.
`long`	`getLongParameter(int index)`	A convenience method to return a parameter as a long.
`int`	`getNumParameters()`	Returns the number of parameters (not including source images).
`int`	`getNumSources()`	Returns the number of source images.
`Object`	`getObjectParameter(int index)`	Gets a parameter as an object.
`Class<?>[]`	`getParamClasses()`	Returns an array of Class objects describing the types of the parameters.
`Vector<Object>`	`getParameters()`	Returns the entire Vector of parameters.
`RenderableImage`	`getRenderableSource(int index)`	Returns a source as a RenderableImage.
`RenderedImage`	`getRenderedSource(int index)`	Returns a source as a `RenderedImage`.
`short`	`getShortParameter(int index)`	A convenience method to return a parameter as a short.
`Object`	`getSource(int index)`	Returns a source as a general Object.
`Vector<Object>`	`getSources()`	Returns the entire Vector of sources.
`void`	`removeParameters()`	Clears the list of parameters.
`void`	`removeSources()`	Clears the list of source images.
`ParameterBlock`	`set(byte b, int index)`	Replaces an Object in the list of parameters with a Byte.
`ParameterBlock`	`set(char c, int index)`	Replaces an Object in the list of parameters with a Character.
`ParameterBlock`	`set(double d, int index)`	Replaces an Object in the list of parameters with a Double.
`ParameterBlock`	`set(float f, int index)`	Replaces an Object in the list of parameters with a Float.
`ParameterBlock`	`set(int i, int index)`	Replaces an Object in the list of parameters with an Integer.
`ParameterBlock`	`set(long l, int index)`	Replaces an Object in the list of parameters with a Long.
`ParameterBlock`	`set(short s, int index)`	Replaces an Object in the list of parameters with a Short.
`ParameterBlock`	`set(Object obj, int index)`	Replaces an Object in the list of parameters.
`void`	`setParameters(Vector<Object> parameters)`	Sets the entire Vector of parameters to a given Vector.
`ParameterBlock`	`setSource(Object source, int index)`	Replaces an entry in the list of source with a new source.
`void`	`setSources(Vector<Object> sources)`	Sets the entire Vector of sources to a given Vector.
`Object`	`shallowClone()`	Creates a shallow copy of a `ParameterBlock`.

Methods declared in class java.lang.Object
equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

- Field Detail
  - sources
```
protected Vector<Object> sources
```
    A Vector of sources, stored as arbitrary Objects.
  - parameters
```
protected Vector<Object> parameters
```
    A Vector of non-source parameters, stored as arbitrary Objects.
- Constructor Detail
  - ParameterBlock
```
public ParameterBlock()
```
    A dummy constructor.
  - ParameterBlock
```
public ParameterBlock(Vector<Object> sources)
```
    Constructs a ParameterBlock with a given Vector of sources.
    
    Parameters:
    
    sources - a Vector of source images
  - ParameterBlock
```
public ParameterBlock(Vector<Object> sources,
                      Vector<Object> parameters)
```
    Constructs a ParameterBlock with a given Vector of sources and Vector of parameters.
    
    Parameters:
    
    sources - a Vector of source images
    
    parameters - a Vector of parameters to be used in the rendering operation
- Method Detail
  - shallowClone
```
public Object shallowClone()
```
    Creates a shallow copy of a ParameterBlock. The source and parameter Vectors are copied by reference -- additions or changes will be visible to both versions.
    
    Returns:
    
    an Object clone of the ParameterBlock.
  - clone
```
public Object clone()
```
    Creates a copy of a ParameterBlock. The source and parameter Vectors are cloned, but the actual sources and parameters are copied by reference. This allows modifications to the order and number of sources and parameters in the clone to be invisible to the original ParameterBlock. Changes to the shared sources or parameters themselves will still be visible.
    
    Overrides:
    
    clone in class Object
    
    Returns:
    
    an Object clone of the ParameterBlock.
    
    See Also:
    
    Cloneable
  - addSource
```
public ParameterBlock addSource(Object source)
```
    Adds an image to end of the list of sources. The image is stored as an object in order to allow new node types in the future.
    
    Parameters:
    
    source - an image object to be stored in the source list.
    
    Returns:
    
    a new ParameterBlock containing the specified source.
  - getSource
```
public Object getSource(int index)
```
    Returns a source as a general Object. The caller must cast it into an appropriate type.
    
    Parameters:
    
    index - the index of the source to be returned.
    
    Returns:
    
    an Object that represents the source located at the specified index in the sources Vector.
    
    See Also:
    
    setSource(Object, int)
  - setSource
```
public ParameterBlock setSource(Object source,
                                int index)
```
    Replaces an entry in the list of source with a new source. If the index lies beyond the current source list, the list is extended with nulls as needed.
    
    Parameters:
    
    source - the specified source image
    
    index - the index into the sources Vector at which to insert the specified source
    
    Returns:
    
    a new ParameterBlock that contains the specified source at the specified index.
    
    See Also:
    
    getSource(int)
  - getRenderedSource
```
public RenderedImage getRenderedSource(int index)
```
    Returns a source as a RenderedImage. This method is a convenience method. An exception will be thrown if the source is not a RenderedImage.
    
    Parameters:
    
    index - the index of the source to be returned
    
    Returns:
    
    a RenderedImage that represents the source image that is at the specified index in the sources Vector.
  - getRenderableSource
```
public RenderableImage getRenderableSource(int index)
```
    Returns a source as a RenderableImage. This method is a convenience method. An exception will be thrown if the sources is not a RenderableImage.
    
    Parameters:
    
    index - the index of the source to be returned
    
    Returns:
    
    a RenderableImage that represents the source image that is at the specified index in the sources Vector.
  - getNumSources
```
public int getNumSources()
```
    Returns the number of source images.
    
    Returns:
    
    the number of source images in the sources Vector.
  - getSources
```
public Vector<Object> getSources()
```
    Returns the entire Vector of sources.
    
    Returns:
    
    the sources Vector.
    
    See Also:
    
    setSources(Vector)
  - setSources
```
public void setSources(Vector<Object> sources)
```
    Sets the entire Vector of sources to a given Vector.
    
    Parameters:
    
    sources - the Vector of source images
    
    See Also:
    
    getSources()
  - removeSources
```
public void removeSources()
```
    Clears the list of source images.
  - getNumParameters
```
public int getNumParameters()
```
    Returns the number of parameters (not including source images).
    
    Returns:
    
    the number of parameters in the parameters Vector.
  - getParameters
```
public Vector<Object> getParameters()
```
    Returns the entire Vector of parameters.
    
    Returns:
    
    the parameters Vector.
    
    See Also:
    
    setParameters(Vector)
  - setParameters
```
public void setParameters(Vector<Object> parameters)
```
    Sets the entire Vector of parameters to a given Vector.
    
    Parameters:
    
    parameters - the specified Vector of parameters
    
    See Also:
    
    getParameters()
  - removeParameters
```
public void removeParameters()
```
    Clears the list of parameters.
  - add
```
public ParameterBlock add(Object obj)
```
    Adds an object to the list of parameters.
    
    Parameters:
    
    obj - the Object to add to the parameters Vector
    
    Returns:
    
    a new ParameterBlock containing the specified parameter.
  - add
```
public ParameterBlock add(byte b)
```
    Adds a Byte to the list of parameters.
    
    Parameters:
    
    b - the byte to add to the parameters Vector
    
    Returns:
    
    a new ParameterBlock containing the specified parameter.
  - add
```
public ParameterBlock add(char c)
```
    Adds a Character to the list of parameters.
    
    Parameters:
    
    c - the char to add to the parameters Vector
    
    Returns:
    
    a new ParameterBlock containing the specified parameter.
  - add
```
public ParameterBlock add(short s)
```
    Adds a Short to the list of parameters.
    
    Parameters:
    
    s - the short to add to the parameters Vector
    
    Returns:
    
    a new ParameterBlock containing the specified parameter.
  - add
```
public ParameterBlock add(int i)
```
    Adds a Integer to the list of parameters.
    
    Parameters:
    
    i - the int to add to the parameters Vector
    
    Returns:
    
    a new ParameterBlock containing the specified parameter.
  - add
```
public ParameterBlock add(long l)
```
    Adds a Long to the list of parameters.
    
    Parameters:
    
    l - the long to add to the parameters Vector
    
    Returns:
    
    a new ParameterBlock containing the specified parameter.
  - add
```
public ParameterBlock add(float f)
```
    Adds a Float to the list of parameters.
    
    Parameters:
    
    f - the float to add to the parameters Vector
    
    Returns:
    
    a new ParameterBlock containing the specified parameter.
  - add
```
public ParameterBlock add(double d)
```
    Adds a Double to the list of parameters.
    
    Parameters:
    
    d - the double to add to the parameters Vector
    
    Returns:
    
    a new ParameterBlock containing the specified parameter.
  - set
```
public ParameterBlock set(Object obj,
                          int index)
```
    Replaces an Object in the list of parameters. If the index lies beyond the current source list, the list is extended with nulls as needed.
    
    Parameters:
    
    obj - the parameter that replaces the parameter at the specified index in the parameters Vector
    
    index - the index of the parameter to be replaced with the specified parameter
    
    Returns:
    
    a new ParameterBlock containing the specified parameter.
  - set
```
public ParameterBlock set(byte b,
                          int index)
```
    Replaces an Object in the list of parameters with a Byte. If the index lies beyond the current source list, the list is extended with nulls as needed.
    
    Parameters:
    
    b - the parameter that replaces the parameter at the specified index in the parameters Vector
    
    index - the index of the parameter to be replaced with the specified parameter
    
    Returns:
    
    a new ParameterBlock containing the specified parameter.
  - set
```
public ParameterBlock set(char c,
                          int index)
```
    Replaces an Object in the list of parameters with a Character. If the index lies beyond the current source list, the list is extended with nulls as needed.
    
    Parameters:
    
    c - the parameter that replaces the parameter at the specified index in the parameters Vector
    
    index - the index of the parameter to be replaced with the specified parameter
    
    Returns:
    
    a new ParameterBlock containing the specified parameter.
  - set
```
public ParameterBlock set(short s,
                          int index)
```
    Replaces an Object in the list of parameters with a Short. If the index lies beyond the current source list, the list is extended with nulls as needed.
    
    Parameters:
    
    s - the parameter that replaces the parameter at the specified index in the parameters Vector
    
    index - the index of the parameter to be replaced with the specified parameter
    
    Returns:
    
    a new ParameterBlock containing the specified parameter.
  - set
```
public ParameterBlock set(int i,
                          int index)
```
    Replaces an Object in the list of parameters with an Integer. If the index lies beyond the current source list, the list is extended with nulls as needed.
    
    Parameters:
    
    i - the parameter that replaces the parameter at the specified index in the parameters Vector
    
    index - the index of the parameter to be replaced with the specified parameter
    
    Returns:
    
    a new ParameterBlock containing the specified parameter.
  - set
```
public ParameterBlock set(long l,
                          int index)
```
    Replaces an Object in the list of parameters with a Long. If the index lies beyond the current source list, the list is extended with nulls as needed.
    
    Parameters:
    
    l - the parameter that replaces the parameter at the specified index in the parameters Vector
    
    index - the index of the parameter to be replaced with the specified parameter
    
    Returns:
    
    a new ParameterBlock containing the specified parameter.
  - set
```
public ParameterBlock set(float f,
                          int index)
```
    Replaces an Object in the list of parameters with a Float. If the index lies beyond the current source list, the list is extended with nulls as needed.
    
    Parameters:
    
    f - the parameter that replaces the parameter at the specified index in the parameters Vector
    
    index - the index of the parameter to be replaced with the specified parameter
    
    Returns:
    
    a new ParameterBlock containing the specified parameter.
  - set
```
public ParameterBlock set(double d,
                          int index)
```
    Replaces an Object in the list of parameters with a Double. If the index lies beyond the current source list, the list is extended with nulls as needed.
    
    Parameters:
    
    d - the parameter that replaces the parameter at the specified index in the parameters Vector
    
    index - the index of the parameter to be replaced with the specified parameter
    
    Returns:
    
    a new ParameterBlock containing the specified parameter.
  - getObjectParameter
```
public Object getObjectParameter(int index)
```
    Gets a parameter as an object.
    
    Parameters:
    
    index - the index of the parameter to get
    
    Returns:
    
    an Object representing the the parameter at the specified index into the parameters Vector.
  - getByteParameter
```
public byte getByteParameter(int index)
```
    A convenience method to return a parameter as a byte. An exception is thrown if the parameter is null or not a Byte.
    
    Parameters:
    
    index - the index of the parameter to be returned.
    
    Returns:
    
    the parameter at the specified index as a byte value.
    
    Throws:
    
    ClassCastException - if the parameter at the specified index is not a Byte
    
    NullPointerException - if the parameter at the specified index is null
    
    ArrayIndexOutOfBoundsException - if index is negative or not less than the current size of this ParameterBlock object
  - getCharParameter
```
public char getCharParameter(int index)
```
    A convenience method to return a parameter as a char. An exception is thrown if the parameter is null or not a Character.
    
    Parameters:
    
    index - the index of the parameter to be returned.
    
    Returns:
    
    the parameter at the specified index as a char value.
    
    Throws:
    
    ClassCastException - if the parameter at the specified index is not a Character
    
    NullPointerException - if the parameter at the specified index is null
    
    ArrayIndexOutOfBoundsException - if index is negative or not less than the current size of this ParameterBlock object
  - getShortParameter
```
public short getShortParameter(int index)
```
    A convenience method to return a parameter as a short. An exception is thrown if the parameter is null or not a Short.
    
    Parameters:
    
    index - the index of the parameter to be returned.
    
    Returns:
    
    the parameter at the specified index as a short value.
    
    Throws:
    
    ClassCastException - if the parameter at the specified index is not a Short
    
    NullPointerException - if the parameter at the specified index is null
    
    ArrayIndexOutOfBoundsException - if index is negative or not less than the current size of this ParameterBlock object
  - getIntParameter
```
public int getIntParameter(int index)
```
    A convenience method to return a parameter as an int. An exception is thrown if the parameter is null or not an Integer.
    
    Parameters:
    
    index - the index of the parameter to be returned.
    
    Returns:
    
    the parameter at the specified index as an int value.
    
    Throws:
    
    ClassCastException - if the parameter at the specified index is not an Integer
    
    NullPointerException - if the parameter at the specified index is null
    
    ArrayIndexOutOfBoundsException - if index is negative or not less than the current size of this ParameterBlock object
  - getLongParameter
```
public long getLongParameter(int index)
```
    A convenience method to return a parameter as a long. An exception is thrown if the parameter is null or not a Long.
    
    Parameters:
    
    index - the index of the parameter to be returned.
    
    Returns:
    
    the parameter at the specified index as a long value.
    
    Throws:
    
    ClassCastException - if the parameter at the specified index is not a Long
    
    NullPointerException - if the parameter at the specified index is null
    
    ArrayIndexOutOfBoundsException - if index is negative or not less than the current size of this ParameterBlock object
  - getFloatParameter
```
public float getFloatParameter(int index)
```
    A convenience method to return a parameter as a float. An exception is thrown if the parameter is null or not a Float.
    
    Parameters:
    
    index - the index of the parameter to be returned.
    
    Returns:
    
    the parameter at the specified index as a float value.
    
    Throws:
    
    ClassCastException - if the parameter at the specified index is not a Float
    
    NullPointerException - if the parameter at the specified index is null
    
    ArrayIndexOutOfBoundsException - if index is negative or not less than the current size of this ParameterBlock object
  - getDoubleParameter
```
public double getDoubleParameter(int index)
```
    A convenience method to return a parameter as a double. An exception is thrown if the parameter is null or not a Double.
    
    Parameters:
    
    index - the index of the parameter to be returned.
    
    Returns:
    
    the parameter at the specified index as a double value.
    
    Throws:
    
    ClassCastException - if the parameter at the specified index is not a Double
    
    NullPointerException - if the parameter at the specified index is null
    
    ArrayIndexOutOfBoundsException - if index is negative or not less than the current size of this ParameterBlock object
  - getParamClasses
```
public Class<?>[] getParamClasses()
```
    Returns an array of Class objects describing the types of the parameters.
    
    Returns:
    
    an array of Class objects.

Class ParameterBlock

Field Summary

Constructor Summary

Method Summary

Methods declared in class java.lang.Object

Field Detail

sources

parameters

Constructor Detail

ParameterBlock

ParameterBlock

ParameterBlock

Method Detail

shallowClone

clone

addSource

getSource

setSource

getRenderedSource

getRenderableSource

getNumSources

getSources

setSources

removeSources

getNumParameters

getParameters

setParameters

removeParameters

add

add

add

add

add

add

add

add

set

set

set

set

set

set

set

set

getObjectParameter

getByteParameter

getCharParameter

getShortParameter

getIntParameter

getLongParameter

getFloatParameter

getDoubleParameter

getParamClasses