Package org.apache.coyote
Enum ActionCode
- All Implemented Interfaces:
Serializable,Comparable<ActionCode>,java.lang.constant.Constable
ActionCodes represent callbacks from the servlet container to the coyote connector. Actions are implemented by
ProtocolHandler, using the ActionHook interface.
- Author:
- Remy Maucherat
- See Also:
-
Nested Class Summary
Nested classes/interfaces inherited from class java.lang.Enum
Enum.EnumDesc<E extends Enum<E>> -
Enum Constant Summary
Enum ConstantsEnum ConstantDescriptionAcknowledge request, most often used for HTTP expectations.Callback for an async call toAsyncContext.complete().Callback for an async call toAsyncContext.dispatch().Callback to indicate the the actual dispatch has started and that the async state needs change.Callback to trigger the error processing.Callback to determine if async processing is in progress.Call back to determine if async complete is in progress.Callback to determine if async dispatch is in progress.Callback to determine if async is in error.Callback to determine if async dispatch is in progress.Callback to determine if async is timing out.Callback to trigger post processing.Callback for an async call toAsyncContext.start(Runnable).Callback for an async call toAsyncContext.setTimeout(long)Callback for an async request.Callback to trigger the processing of an async timeout.Callback for getting the amount of available bytes.A flush() operation originated by the client ( i.e. a flush() on the servlet output stream or writer, called by a servlet ).Regular close.A serious error occurred from which it is not possible to recover safely.Response commit, which means any initial bytes part of the response are going to be sent.Obtain the connection identifier for the request.Hook called if swallowing request input should be disabled.Indicates that the container needs to trigger a call to onError() for the registered non-blocking write and/or read listener(s).Execute any non-blocking dispatches that have been registered viaDISPATCH_READorDISPATCH_WRITE.Indicates that the container needs to trigger a call to onDataAvailable() for the registered non-blocking read listener.Indicates that the container needs to trigger a call to onWritePossible() for the registered non-blocking write listener.Send an RFC 8297 Early Hints informational response.Has the processor been placed into the error state?The processor may have been placed into an error state and some error states do not permit any further I/O.Is server push supported and allowed for the current request?Are the request trailer fields ready to be read?Are HTTP trailer fields supported for the current response?Indicator that Servlet is interested in being notified when data is available to be read.Used with non-blocking writes to determine if a write is currently allowed (sets passed parameter totrue) or not (sets passed parameter tofalse).Push a request on behalf of the client of the current request.Callback for lazy evaluation - extract the remote host address.Callback for lazy evaluation - extract the remote host name and address.Callback for lazy evaluation - local address.Callback for lazy evaluation - local address.Callback for lazy evaluation - socket local port.Callback for lazy evaluation - extract the connection peer address.Callback for lazy evaluation - socket remote port.Callback for setting FORM auth body replayCallback for lazy evaluation - extract the SSL-related attributes including the client certificate if present.Force a TLS re-handshake and make the resulting client certificate (if any) available as a request attribute.Indicates if the request body has been fully read.Obtain the stream identifier for the request.Callback to trigger the HTTP upgrade process. -
Method Summary
Modifier and TypeMethodDescriptionstatic ActionCodeReturns the enum constant of this type with the specified name.static ActionCode[]values()Returns an array containing the constants of this enum type, in the order they are declared.
-
Enum Constant Details
-
ACK
Acknowledge request, most often used for HTTP expectations. -
CLOSE
Regular close. -
COMMIT
Response commit, which means any initial bytes part of the response are going to be sent. -
CLOSE_NOW
A serious error occurred from which it is not possible to recover safely. Further attempts to write to the response should be ignored and the connection needs to be closed as soon as possible. This can also be used to forcibly close a connection if an error occurs after the response has been committed. -
CLIENT_FLUSH
A flush() operation originated by the client ( i.e. a flush() on the servlet output stream or writer, called by a servlet ). Argument is the Response. -
IS_ERROR
Has the processor been placed into the error state? Note that the response may not have an appropriate error code set. -
IS_IO_ALLOWED
The processor may have been placed into an error state and some error states do not permit any further I/O. Is I/O currently allowed? -
DISABLE_SWALLOW_INPUT
Hook called if swallowing request input should be disabled. Example: Cancel a large file upload. -
REQ_HOST_ATTRIBUTE
Callback for lazy evaluation - extract the remote host name and address. -
REQ_HOST_ADDR_ATTRIBUTE
Callback for lazy evaluation - extract the remote host address. -
REQ_PEER_ADDR_ATTRIBUTE
Callback for lazy evaluation - extract the connection peer address. -
REQ_SSL_ATTRIBUTE
Callback for lazy evaluation - extract the SSL-related attributes including the client certificate if present. -
REQ_SSL_CERTIFICATE
Force a TLS re-handshake and make the resulting client certificate (if any) available as a request attribute. -
REQ_REMOTEPORT_ATTRIBUTE
Callback for lazy evaluation - socket remote port. -
REQ_LOCALPORT_ATTRIBUTE
Callback for lazy evaluation - socket local port. -
REQ_LOCAL_ADDR_ATTRIBUTE
Callback for lazy evaluation - local address. -
REQ_LOCAL_NAME_ATTRIBUTE
Callback for lazy evaluation - local address. -
REQ_SET_BODY_REPLAY
Callback for setting FORM auth body replay -
AVAILABLE
Callback for getting the amount of available bytes. -
ASYNC_START
Callback for an async request. -
ASYNC_DISPATCH
Callback for an async call toAsyncContext.dispatch(). -
ASYNC_DISPATCHED
Callback to indicate the the actual dispatch has started and that the async state needs change. -
ASYNC_RUN
Callback for an async call toAsyncContext.start(Runnable). -
ASYNC_COMPLETE
Callback for an async call toAsyncContext.complete(). -
ASYNC_TIMEOUT
Callback to trigger the processing of an async timeout. -
ASYNC_ERROR
Callback to trigger the error processing. -
ASYNC_SETTIMEOUT
Callback for an async call toAsyncContext.setTimeout(long) -
ASYNC_IS_ASYNC
Callback to determine if async processing is in progress. -
ASYNC_IS_STARTED
Callback to determine if async dispatch is in progress. -
ASYNC_IS_COMPLETING
Call back to determine if async complete is in progress. -
ASYNC_IS_DISPATCHING
Callback to determine if async dispatch is in progress. -
ASYNC_IS_TIMINGOUT
Callback to determine if async is timing out. -
ASYNC_IS_ERROR
Callback to determine if async is in error. -
ASYNC_POST_PROCESS
Callback to trigger post processing. Typically only used during error handling to trigger essential processing that otherwise would be skipped. -
UPGRADE
Callback to trigger the HTTP upgrade process. -
NB_READ_INTEREST
Indicator that Servlet is interested in being notified when data is available to be read. -
NB_WRITE_INTEREST
Used with non-blocking writes to determine if a write is currently allowed (sets passed parameter totrue) or not (sets passed parameter tofalse). If a write is not allowed then callback will be triggered at some future point when write becomes possible again. -
REQUEST_BODY_FULLY_READ
Indicates if the request body has been fully read. -
DISPATCH_READ
Indicates that the container needs to trigger a call to onDataAvailable() for the registered non-blocking read listener. -
DISPATCH_WRITE
Indicates that the container needs to trigger a call to onWritePossible() for the registered non-blocking write listener. -
DISPATCH_ERROR
Indicates that the container needs to trigger a call to onError() for the registered non-blocking write and/or read listener(s). -
DISPATCH_EXECUTE
Execute any non-blocking dispatches that have been registered viaDISPATCH_READorDISPATCH_WRITE. Typically required when the non-blocking listeners are configured on a thread where the processing wasn't triggered by a read or write event on the socket. -
IS_PUSH_SUPPORTED
Is server push supported and allowed for the current request? -
PUSH_REQUEST
Push a request on behalf of the client of the current request. -
IS_TRAILER_FIELDS_READY
Are the request trailer fields ready to be read? Note that this returns true if it is known that request trailer fields are not supported so an empty collection of trailers can then be read. -
IS_TRAILER_FIELDS_SUPPORTED
Are HTTP trailer fields supported for the current response? Note that once an HTTP/1.1 response has been committed, it will no longer support trailer fields. -
CONNECTION_ID
Obtain the connection identifier for the request. Used with multiplexing protocols such as HTTP/2. -
STREAM_ID
Obtain the stream identifier for the request. Used with multiplexing protocols such as HTTP/2. -
EARLY_HINTS
Send an RFC 8297 Early Hints informational response.
-
-
Method Details
-
values
Returns an array containing the constants of this enum type, in the order they are declared.- Returns:
- an array containing the constants of this enum type, in the order they are declared
-
valueOf
Returns the enum constant of this type with the specified name. The string must match exactly an identifier used to declare an enum constant in this type. (Extraneous whitespace characters are not permitted.)- Parameters:
name- the name of the enum constant to be returned.- Returns:
- the enum constant with the specified name
- Throws:
IllegalArgumentException- if this enum type has no constant with the specified nameNullPointerException- if the argument is null
-