CUDA Driver API :: CUDA Toolkit Documentation

4.18. Texture Reference Management

This section describes the texture reference management functions of the low-level CUDA driver application programming interface.

Functions

CUresult cuTexRefGetAddress ( CUdeviceptr* pdptr, CUtexref hTexRef ): Gets the address associated with a texture reference.
CUresult cuTexRefGetAddressMode ( CUaddress_mode* pam, CUtexref hTexRef, int dim ): Gets the addressing mode used by a texture reference.
CUresult cuTexRefGetArray ( CUarray* phArray, CUtexref hTexRef ): Gets the array bound to a texture reference.
CUresult cuTexRefGetBorderColor ( float* pBorderColor, CUtexref hTexRef ): Gets the border color used by a texture reference.
CUresult cuTexRefGetFilterMode ( CUfilter_mode* pfm, CUtexref hTexRef ): Gets the filter-mode used by a texture reference.
CUresult cuTexRefGetFlags ( unsigned int* pFlags, CUtexref hTexRef ): Gets the flags used by a texture reference.
CUresult cuTexRefGetFormat ( CUarray_format* pFormat, int* pNumChannels, CUtexref hTexRef ): Gets the format used by a texture reference.
CUresult cuTexRefGetMaxAnisotropy ( int* pmaxAniso, CUtexref hTexRef ): Gets the maximum anisotropy for a texture reference.
CUresult cuTexRefGetMipmapFilterMode ( CUfilter_mode* pfm, CUtexref hTexRef ): Gets the mipmap filtering mode for a texture reference.
CUresult cuTexRefGetMipmapLevelBias ( float* pbias, CUtexref hTexRef ): Gets the mipmap level bias for a texture reference.
CUresult cuTexRefGetMipmapLevelClamp ( float* pminMipmapLevelClamp, float* pmaxMipmapLevelClamp, CUtexref hTexRef ): Gets the min/max mipmap level clamps for a texture reference.
CUresult cuTexRefGetMipmappedArray ( CUmipmappedArray* phMipmappedArray, CUtexref hTexRef ): Gets the mipmapped array bound to a texture reference.
CUresult cuTexRefSetAddress ( size_t* ByteOffset, CUtexref hTexRef, CUdeviceptr dptr, size_t bytes ): Binds an address as a texture reference.
CUresult cuTexRefSetAddress2D ( CUtexref hTexRef, const CUDA_ARRAY_DESCRIPTOR* desc, CUdeviceptr dptr, size_t Pitch ): Binds an address as a 2D texture reference.
CUresult cuTexRefSetAddressMode ( CUtexref hTexRef, int dim, CUaddress_mode am ): Sets the addressing mode for a texture reference.
CUresult cuTexRefSetArray ( CUtexref hTexRef, CUarray hArray, unsigned int Flags ): Binds an array as a texture reference.
CUresult cuTexRefSetBorderColor ( CUtexref hTexRef, float* pBorderColor ): Sets the border color for a texture reference.
CUresult cuTexRefSetFilterMode ( CUtexref hTexRef, CUfilter_mode fm ): Sets the filtering mode for a texture reference.
CUresult cuTexRefSetFlags ( CUtexref hTexRef, unsigned int Flags ): Sets the flags for a texture reference.
CUresult cuTexRefSetFormat ( CUtexref hTexRef, CUarray_format fmt, int NumPackedComponents ): Sets the format for a texture reference.
CUresult cuTexRefSetMaxAnisotropy ( CUtexref hTexRef, unsigned int maxAniso ): Sets the maximum anisotropy for a texture reference.
CUresult cuTexRefSetMipmapFilterMode ( CUtexref hTexRef, CUfilter_mode fm ): Sets the mipmap filtering mode for a texture reference.
CUresult cuTexRefSetMipmapLevelBias ( CUtexref hTexRef, float bias ): Sets the mipmap level bias for a texture reference.
CUresult cuTexRefSetMipmapLevelClamp ( CUtexref hTexRef, float minMipmapLevelClamp, float maxMipmapLevelClamp ): Sets the mipmap min/max mipmap level clamps for a texture reference.
CUresult cuTexRefSetMipmappedArray ( CUtexref hTexRef, CUmipmappedArray hMipmappedArray, unsigned int Flags ): Binds a mipmapped array to a texture reference.

Functions

CUresult cuTexRefGetAddress ( CUdeviceptr* pdptr, CUtexref hTexRef )

Gets the address associated with a texture reference.

Parameters

pdptr: - Returned device address
hTexRef: - Texture reference

Returns

CUDA_SUCCESS, CUDA_ERROR_DEINITIALIZED, CUDA_ERROR_NOT_INITIALIZED, CUDA_ERROR_INVALID_CONTEXT, CUDA_ERROR_INVALID_VALUE

Description

Returns in *pdptr the base address bound to the texture reference hTexRef, or returns CUDA_ERROR_INVALID_VALUE if the texture reference is not bound to any device memory range.

CUresult cuTexRefGetAddressMode ( CUaddress_mode* pam, CUtexref hTexRef, int dim )

Gets the addressing mode used by a texture reference.

Parameters

pam: - Returned addressing mode
hTexRef: - Texture reference
dim: - Dimension

Returns

CUDA_SUCCESS, CUDA_ERROR_DEINITIALIZED, CUDA_ERROR_NOT_INITIALIZED, CUDA_ERROR_INVALID_CONTEXT, CUDA_ERROR_INVALID_VALUE

Description

Returns in *pam the addressing mode corresponding to the dimension dim of the texture reference hTexRef. Currently, the only valid value for dim are 0 and 1.

CUresult cuTexRefGetArray ( CUarray* phArray, CUtexref hTexRef )

Gets the array bound to a texture reference.

Parameters

phArray: - Returned array
hTexRef: - Texture reference

Returns

CUDA_SUCCESS, CUDA_ERROR_DEINITIALIZED, CUDA_ERROR_NOT_INITIALIZED, CUDA_ERROR_INVALID_CONTEXT, CUDA_ERROR_INVALID_VALUE

Description

Returns in *phArray the CUDA array bound to the texture reference hTexRef, or returns CUDA_ERROR_INVALID_VALUE if the texture reference is not bound to any CUDA array.

CUresult cuTexRefGetBorderColor ( float* pBorderColor, CUtexref hTexRef )

Gets the border color used by a texture reference.

Parameters

pBorderColor: - Returned Type and Value of RGBA color
hTexRef: - Texture reference

Returns

CUDA_SUCCESS, CUDA_ERROR_DEINITIALIZED, CUDA_ERROR_NOT_INITIALIZED, CUDA_ERROR_INVALID_CONTEXT, CUDA_ERROR_INVALID_VALUE

Description

Returns in pBorderColor, values of the RGBA color used by the texture reference hTexRef. The color value is of type float and holds color components in the following sequence: pBorderColor[0] holds 'R' component pBorderColor[1] holds 'G' component pBorderColor[2] holds 'B' component pBorderColor[3] holds 'A' component

CUresult cuTexRefGetFilterMode ( CUfilter_mode* pfm, CUtexref hTexRef )

Gets the filter-mode used by a texture reference.

Parameters

pfm: - Returned filtering mode
hTexRef: - Texture reference

Returns

CUDA_SUCCESS, CUDA_ERROR_DEINITIALIZED, CUDA_ERROR_NOT_INITIALIZED, CUDA_ERROR_INVALID_CONTEXT, CUDA_ERROR_INVALID_VALUE

Description

Returns in *pfm the filtering mode of the texture reference hTexRef.

CUresult cuTexRefGetFlags ( unsigned int* pFlags, CUtexref hTexRef )

Gets the flags used by a texture reference.

Parameters

pFlags: - Returned flags
hTexRef: - Texture reference

Returns

CUDA_SUCCESS, CUDA_ERROR_DEINITIALIZED, CUDA_ERROR_NOT_INITIALIZED, CUDA_ERROR_INVALID_CONTEXT, CUDA_ERROR_INVALID_VALUE

Description

Returns in *pFlags the flags of the texture reference hTexRef.

CUresult cuTexRefGetFormat ( CUarray_format* pFormat, int* pNumChannels, CUtexref hTexRef )

Gets the format used by a texture reference.

Parameters

pFormat: - Returned format
pNumChannels: - Returned number of components
hTexRef: - Texture reference

Returns

CUDA_SUCCESS, CUDA_ERROR_DEINITIALIZED, CUDA_ERROR_NOT_INITIALIZED, CUDA_ERROR_INVALID_CONTEXT, CUDA_ERROR_INVALID_VALUE

Description

Returns in *pFormat and *pNumChannels the format and number of components of the CUDA array bound to the texture reference hTexRef. If pFormat or pNumChannels is NULL, it will be ignored.

CUresult cuTexRefGetMaxAnisotropy ( int* pmaxAniso, CUtexref hTexRef )

Gets the maximum anisotropy for a texture reference.

Parameters

pmaxAniso: - Returned maximum anisotropy
hTexRef: - Texture reference

Returns

CUDA_SUCCESS, CUDA_ERROR_DEINITIALIZED, CUDA_ERROR_NOT_INITIALIZED, CUDA_ERROR_INVALID_CONTEXT, CUDA_ERROR_INVALID_VALUE

Description

Returns the maximum anisotropy in pmaxAniso that's used when reading memory through the texture reference hTexRef.

CUresult cuTexRefGetMipmapFilterMode ( CUfilter_mode* pfm, CUtexref hTexRef )

Gets the mipmap filtering mode for a texture reference.

Parameters

pfm: - Returned mipmap filtering mode
hTexRef: - Texture reference

Returns

CUDA_SUCCESS, CUDA_ERROR_DEINITIALIZED, CUDA_ERROR_NOT_INITIALIZED, CUDA_ERROR_INVALID_CONTEXT, CUDA_ERROR_INVALID_VALUE

Description

Returns the mipmap filtering mode in pfm that's used when reading memory through the texture reference hTexRef.

See also:

CUresult cuTexRefGetMipmapLevelBias ( float* pbias, CUtexref hTexRef )

Gets the mipmap level bias for a texture reference.

Parameters

pbias: - Returned mipmap level bias
hTexRef: - Texture reference

Returns

CUDA_SUCCESS, CUDA_ERROR_DEINITIALIZED, CUDA_ERROR_NOT_INITIALIZED, CUDA_ERROR_INVALID_CONTEXT, CUDA_ERROR_INVALID_VALUE

Description

Returns the mipmap level bias in pBias that's added to the specified mipmap level when reading memory through the texture reference hTexRef.

See also:

CUresult cuTexRefGetMipmapLevelClamp ( float* pminMipmapLevelClamp, float* pmaxMipmapLevelClamp, CUtexref hTexRef )

Gets the min/max mipmap level clamps for a texture reference.

Parameters

pminMipmapLevelClamp: - Returned mipmap min level clamp
pmaxMipmapLevelClamp: - Returned mipmap max level clamp
hTexRef: - Texture reference

Returns

CUDA_SUCCESS, CUDA_ERROR_DEINITIALIZED, CUDA_ERROR_NOT_INITIALIZED, CUDA_ERROR_INVALID_CONTEXT, CUDA_ERROR_INVALID_VALUE

Description

Returns the min/max mipmap level clamps in pminMipmapLevelClamp and pmaxMipmapLevelClamp that's used when reading memory through the texture reference hTexRef.

See also:

CUresult cuTexRefGetMipmappedArray ( CUmipmappedArray* phMipmappedArray, CUtexref hTexRef )

Gets the mipmapped array bound to a texture reference.

Parameters

phMipmappedArray: - Returned mipmapped array
hTexRef: - Texture reference

Returns

CUDA_SUCCESS, CUDA_ERROR_DEINITIALIZED, CUDA_ERROR_NOT_INITIALIZED, CUDA_ERROR_INVALID_CONTEXT, CUDA_ERROR_INVALID_VALUE

Description

Returns in *phMipmappedArray the CUDA mipmapped array bound to the texture reference hTexRef, or returns CUDA_ERROR_INVALID_VALUE if the texture reference is not bound to any CUDA mipmapped array.

CUresult cuTexRefSetAddress ( size_t* ByteOffset, CUtexref hTexRef, CUdeviceptr dptr, size_t bytes )

Binds an address as a texture reference.

Parameters

ByteOffset: - Returned byte offset
hTexRef: - Texture reference to bind
dptr: - Device pointer to bind
bytes: - Size of memory to bind in bytes

Returns

CUDA_SUCCESS, CUDA_ERROR_DEINITIALIZED, CUDA_ERROR_NOT_INITIALIZED, CUDA_ERROR_INVALID_CONTEXT, CUDA_ERROR_INVALID_VALUE

Description

Binds a linear address range to the texture reference hTexRef. Any previous address or CUDA array state associated with the texture reference is superseded by this function. Any memory previously bound to hTexRef is unbound.

Since the hardware enforces an alignment requirement on texture base addresses, cuTexRefSetAddress() passes back a byte offset in *ByteOffset that must be applied to texture fetches in order to read from the desired memory. This offset must be divided by the texel size and passed to kernels that read from the texture so they can be applied to the tex1Dfetch() function.

If the device memory pointer was returned from cuMemAlloc(), the offset is guaranteed to be 0 and NULL may be passed as the ByteOffset parameter.

The total number of elements (or texels) in the linear address range cannot exceed CU_DEVICE_ATTRIBUTE_MAXIMUM_TEXTURE1D_LINEAR_WIDTH. The number of elements is computed as (bytes / bytesPerElement), where bytesPerElement is determined from the data format and number of components set using cuTexRefSetFormat().

CUresult cuTexRefSetAddress2D ( CUtexref hTexRef, const CUDA_ARRAY_DESCRIPTOR* desc, CUdeviceptr dptr, size_t Pitch )

Binds an address as a 2D texture reference.

Parameters

hTexRef: - Texture reference to bind
desc: - Descriptor of CUDA array
dptr: - Device pointer to bind
Pitch: - Line pitch in bytes

Returns

CUDA_SUCCESS, CUDA_ERROR_DEINITIALIZED, CUDA_ERROR_NOT_INITIALIZED, CUDA_ERROR_INVALID_CONTEXT, CUDA_ERROR_INVALID_VALUE

Description

Using a tex2D() function inside a kernel requires a call to either cuTexRefSetArray() to bind the corresponding texture reference to an array, or cuTexRefSetAddress2D() to bind the texture reference to linear memory.

Function calls to cuTexRefSetFormat() cannot follow calls to cuTexRefSetAddress2D() for the same texture reference.

It is required that dptr be aligned to the appropriate hardware-specific texture alignment. You can query this value using the device attribute CU_DEVICE_ATTRIBUTE_TEXTURE_ALIGNMENT. If an unaligned dptr is supplied, CUDA_ERROR_INVALID_VALUE is returned.

Pitch has to be aligned to the hardware-specific texture pitch alignment. This value can be queried using the device attribute CU_DEVICE_ATTRIBUTE_TEXTURE_PITCH_ALIGNMENT. If an unaligned Pitch is supplied, CUDA_ERROR_INVALID_VALUE is returned.

Width and Height, which are specified in elements (or texels), cannot exceed CU_DEVICE_ATTRIBUTE_MAXIMUM_TEXTURE2D_LINEAR_WIDTH and CU_DEVICE_ATTRIBUTE_MAXIMUM_TEXTURE2D_LINEAR_HEIGHT respectively. Pitch, which is specified in bytes, cannot exceed CU_DEVICE_ATTRIBUTE_MAXIMUM_TEXTURE2D_LINEAR_PITCH.

CUresult cuTexRefSetAddressMode ( CUtexref hTexRef, int dim, CUaddress_mode am )

Sets the addressing mode for a texture reference.

Parameters

hTexRef: - Texture reference
dim: - Dimension
am: - Addressing mode to set

Returns

CUDA_SUCCESS, CUDA_ERROR_DEINITIALIZED, CUDA_ERROR_NOT_INITIALIZED, CUDA_ERROR_INVALID_CONTEXT, CUDA_ERROR_INVALID_VALUE

Description

Specifies the addressing mode am for the given dimension dim of the texture reference hTexRef. If dim is zero, the addressing mode is applied to the first parameter of the functions used to fetch from the texture; if dim is 1, the second, and so on. CUaddress_mode is defined as:

‎   typedef enum CUaddress_mode_enum {
            CU_TR_ADDRESS_MODE_WRAP = 0,
            CU_TR_ADDRESS_MODE_CLAMP = 1,
            CU_TR_ADDRESS_MODE_MIRROR = 2,
            CU_TR_ADDRESS_MODE_BORDER = 3
         } CUaddress_mode;

Note that this call has no effect if hTexRef is bound to linear memory. Also, if the flag, CU_TRSF_NORMALIZED_COORDINATES, is not set, the only supported address mode is CU_TR_ADDRESS_MODE_CLAMP.

CUresult cuTexRefSetArray ( CUtexref hTexRef, CUarray hArray, unsigned int Flags )

Binds an array as a texture reference.

Parameters

hTexRef: - Texture reference to bind
hArray: - Array to bind
Flags: - Options (must be CU_TRSA_OVERRIDE_FORMAT)

Returns

CUDA_SUCCESS, CUDA_ERROR_DEINITIALIZED, CUDA_ERROR_NOT_INITIALIZED, CUDA_ERROR_INVALID_CONTEXT, CUDA_ERROR_INVALID_VALUE

Description

Binds the CUDA array hArray to the texture reference hTexRef. Any previous address or CUDA array state associated with the texture reference is superseded by this function. Flags must be set to CU_TRSA_OVERRIDE_FORMAT. Any CUDA array previously bound to hTexRef is unbound.

CUresult cuTexRefSetBorderColor ( CUtexref hTexRef, float* pBorderColor )

Sets the border color for a texture reference.

Parameters

hTexRef: - Texture reference
pBorderColor: - RGBA color

Returns

CUDA_SUCCESS, CUDA_ERROR_DEINITIALIZED, CUDA_ERROR_NOT_INITIALIZED, CUDA_ERROR_INVALID_CONTEXT, CUDA_ERROR_INVALID_VALUE

Description

Specifies the value of the RGBA color via the pBorderColor to the texture reference hTexRef. The color value supports only float type and holds color components in the following sequence: pBorderColor[0] holds 'R' component pBorderColor[1] holds 'G' component pBorderColor[2] holds 'B' component pBorderColor[3] holds 'A' component

Note that the color values can be set only when the Address mode is set to CU_TR_ADDRESS_MODE_BORDER using cuTexRefSetAddressMode. Applications using integer border color values have to "reinterpret_cast" their values to float.

CUresult cuTexRefSetFilterMode ( CUtexref hTexRef, CUfilter_mode fm )

Sets the filtering mode for a texture reference.

Parameters

hTexRef: - Texture reference
fm: - Filtering mode to set

Returns

CUDA_SUCCESS, CUDA_ERROR_DEINITIALIZED, CUDA_ERROR_NOT_INITIALIZED, CUDA_ERROR_INVALID_CONTEXT, CUDA_ERROR_INVALID_VALUE

Description

Specifies the filtering mode fm to be used when reading memory through the texture reference hTexRef. CUfilter_mode_enum is defined as:

‎   typedef enum CUfilter_mode_enum {
            CU_TR_FILTER_MODE_POINT = 0,
            CU_TR_FILTER_MODE_LINEAR = 1
         } CUfilter_mode;

Note that this call has no effect if hTexRef is bound to linear memory.

See also:

CUresult cuTexRefSetFlags ( CUtexref hTexRef, unsigned int Flags )

Sets the flags for a texture reference.

Parameters

hTexRef: - Texture reference
Flags: - Optional flags to set

Returns

CUDA_SUCCESS, CUDA_ERROR_DEINITIALIZED, CUDA_ERROR_NOT_INITIALIZED, CUDA_ERROR_INVALID_CONTEXT, CUDA_ERROR_INVALID_VALUE

Description

Specifies optional flags via Flags to specify the behavior of data returned through the texture reference hTexRef. The valid flags are:

CU_TRSF_READ_AS_INTEGER, which suppresses the default behavior of having the texture promote integer data to floating point data in the range [0, 1]. Note that texture with 32-bit integer format would not be promoted, regardless of whether or not this flag is specified;
CU_TRSF_NORMALIZED_COORDINATES, which suppresses the default behavior of having the texture coordinates range from [0, Dim) where Dim is the width or height of the CUDA array. Instead, the texture coordinates [0, 1.0) reference the entire breadth of the array dimension;

CUresult cuTexRefSetFormat ( CUtexref hTexRef, CUarray_format fmt, int NumPackedComponents )

Sets the format for a texture reference.

Parameters

hTexRef: - Texture reference
fmt: - Format to set
NumPackedComponents: - Number of components per array element

Returns

CUDA_SUCCESS, CUDA_ERROR_DEINITIALIZED, CUDA_ERROR_NOT_INITIALIZED, CUDA_ERROR_INVALID_CONTEXT, CUDA_ERROR_INVALID_VALUE

Description

Specifies the format of the data to be read by the texture reference hTexRef. fmt and NumPackedComponents are exactly analogous to the Format and NumChannels members of the CUDA_ARRAY_DESCRIPTOR structure: They specify the format of each component and the number of components per array element.

CUresult cuTexRefSetMaxAnisotropy ( CUtexref hTexRef, unsigned int maxAniso )

Sets the maximum anisotropy for a texture reference.

Parameters

hTexRef: - Texture reference
maxAniso: - Maximum anisotropy

Returns

CUDA_SUCCESS, CUDA_ERROR_DEINITIALIZED, CUDA_ERROR_NOT_INITIALIZED, CUDA_ERROR_INVALID_CONTEXT, CUDA_ERROR_INVALID_VALUE

Description

Specifies the maximum anisotropy maxAniso to be used when reading memory through the texture reference hTexRef.

Note that this call has no effect if hTexRef is bound to linear memory.

See also:

CUresult cuTexRefSetMipmapFilterMode ( CUtexref hTexRef, CUfilter_mode fm )

Sets the mipmap filtering mode for a texture reference.

Parameters

hTexRef: - Texture reference
fm: - Filtering mode to set

Returns

CUDA_SUCCESS, CUDA_ERROR_DEINITIALIZED, CUDA_ERROR_NOT_INITIALIZED, CUDA_ERROR_INVALID_CONTEXT, CUDA_ERROR_INVALID_VALUE

Description

Specifies the mipmap filtering mode fm to be used when reading memory through the texture reference hTexRef. CUfilter_mode_enum is defined as:

‎   typedef enum CUfilter_mode_enum {
            CU_TR_FILTER_MODE_POINT = 0,
            CU_TR_FILTER_MODE_LINEAR = 1
         } CUfilter_mode;

Note that this call has no effect if hTexRef is not bound to a mipmapped array.

See also:

CUresult cuTexRefSetMipmapLevelBias ( CUtexref hTexRef, float bias )

Sets the mipmap level bias for a texture reference.

Parameters

hTexRef: - Texture reference
bias: - Mipmap level bias

Returns

CUDA_SUCCESS, CUDA_ERROR_DEINITIALIZED, CUDA_ERROR_NOT_INITIALIZED, CUDA_ERROR_INVALID_CONTEXT, CUDA_ERROR_INVALID_VALUE

Description

Specifies the mipmap level bias bias to be added to the specified mipmap level when reading memory through the texture reference hTexRef.

Note that this call has no effect if hTexRef is not bound to a mipmapped array.

See also:

CUresult cuTexRefSetMipmapLevelClamp ( CUtexref hTexRef, float minMipmapLevelClamp, float maxMipmapLevelClamp )

Sets the mipmap min/max mipmap level clamps for a texture reference.

Parameters

hTexRef: - Texture reference
minMipmapLevelClamp: - Mipmap min level clamp
maxMipmapLevelClamp: - Mipmap max level clamp

Returns

CUDA_SUCCESS, CUDA_ERROR_DEINITIALIZED, CUDA_ERROR_NOT_INITIALIZED, CUDA_ERROR_INVALID_CONTEXT, CUDA_ERROR_INVALID_VALUE

Description

Specifies the min/max mipmap level clamps, minMipmapLevelClamp and maxMipmapLevelClamp respectively, to be used when reading memory through the texture reference hTexRef.

Note that this call has no effect if hTexRef is not bound to a mipmapped array.

See also:

CUresult cuTexRefSetMipmappedArray ( CUtexref hTexRef, CUmipmappedArray hMipmappedArray, unsigned int Flags )

Binds a mipmapped array to a texture reference.

Parameters

hTexRef: - Texture reference to bind
hMipmappedArray: - Mipmapped array to bind
Flags: - Options (must be CU_TRSA_OVERRIDE_FORMAT)

Returns

CUDA_SUCCESS, CUDA_ERROR_DEINITIALIZED, CUDA_ERROR_NOT_INITIALIZED, CUDA_ERROR_INVALID_CONTEXT, CUDA_ERROR_INVALID_VALUE

Description

Binds the CUDA mipmapped array hMipmappedArray to the texture reference hTexRef. Any previous address or CUDA array state associated with the texture reference is superseded by this function. Flags must be set to CU_TRSA_OVERRIDE_FORMAT. Any CUDA array previously bound to hTexRef is unbound.

See also: