4.15. Direct3D 9 Interoperability [DEPRECATED]

This section describes deprecated Direct3D 9 interoperability functions.

Enumerations

enum cudaD3D9MapFlags
enum cudaD3D9RegisterFlags

Functions

__host__cudaError_t cudaD3D9MapResources ( int  count, IDirect3DResource9** ppResources )
Map Direct3D resources for access by CUDA.
__host__cudaError_t cudaD3D9RegisterResource ( IDirect3DResource9* pResource, unsigned int  flags )
Registers a Direct3D resource for access by CUDA.
__host__cudaError_t cudaD3D9ResourceGetMappedArray ( cudaArray** ppArray, IDirect3DResource9* pResource, unsigned int  face, unsigned int  level )
Get an array through which to access a subresource of a Direct3D resource which has been mapped for access by CUDA.
__host__cudaError_t cudaD3D9ResourceGetMappedPitch ( size_t* pPitch, size_t* pPitchSlice, IDirect3DResource9* pResource, unsigned int  face, unsigned int  level )
Get the pitch of a subresource of a Direct3D resource which has been mapped for access by CUDA.
__host__cudaError_t cudaD3D9ResourceGetMappedPointer ( void** pPointer, IDirect3DResource9* pResource, unsigned int  face, unsigned int  level )
Get a pointer through which to access a subresource of a Direct3D resource which has been mapped for access by CUDA.
__host__cudaError_t cudaD3D9ResourceGetMappedSize ( size_t* pSize, IDirect3DResource9* pResource, unsigned int  face, unsigned int  level )
Get the size of a subresource of a Direct3D resource which has been mapped for access by CUDA.
__host__cudaError_t cudaD3D9ResourceGetSurfaceDimensions ( size_t* pWidth, size_t* pHeight, size_t* pDepth, IDirect3DResource9* pResource, unsigned int  face, unsigned int  level )
Get the dimensions of a registered Direct3D surface.
__host__cudaError_t cudaD3D9ResourceSetMapFlags ( IDirect3DResource9* pResource, unsigned int  flags )
Set usage flags for mapping a Direct3D resource.
__host__cudaError_t cudaD3D9UnmapResources ( int  count, IDirect3DResource9** ppResources )
Unmap Direct3D resources for access by CUDA.
__host__cudaError_t cudaD3D9UnregisterResource ( IDirect3DResource9* pResource )
Unregisters a Direct3D resource for access by CUDA.

Enumerations

enum cudaD3D9MapFlags

CUDA D3D9 Map Flags

Values
cudaD3D9MapFlagsNone = 0
Default; Assume resource can be read/written
cudaD3D9MapFlagsReadOnly = 1
CUDA kernels will not write to this resource
cudaD3D9MapFlagsWriteDiscard = 2
CUDA kernels will only write to and will not read from this resource
enum cudaD3D9RegisterFlags

CUDA D3D9 Register Flags

Values
cudaD3D9RegisterFlagsNone = 0
Default; Resource can be accessed througa void*
cudaD3D9RegisterFlagsArray = 1
Resource can be accessed through a CUarray*

Functions

__host__cudaError_t cudaD3D9MapResources ( int  count, IDirect3DResource9** ppResources )
Map Direct3D resources for access by CUDA.
Parameters
count
- Number of resources to map for CUDA
ppResources
- Resources to map for CUDA
Deprecated

This function is deprecated as of CUDA 3.0.

Description

Maps the count Direct3D resources in ppResources for access by CUDA.

The resources in ppResources may be accessed in CUDA kernels until they are unmapped. Direct3D should not access any resources while they are mapped by CUDA. If an application does so, the results are undefined.

This function provides the synchronization guarantee that any Direct3D calls issued before cudaD3D9MapResources() will complete before any CUDA kernels issued after cudaD3D9MapResources() begin.

If any of ppResources have not been registered for use with CUDA or if ppResources contains any duplicate entries then cudaErrorInvalidResourceHandle is returned. If any of ppResources are presently mapped for access by CUDA then cudaErrorUnknown is returned.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaGraphicsMapResources

__host__cudaError_t cudaD3D9RegisterResource ( IDirect3DResource9* pResource, unsigned int  flags )
Registers a Direct3D resource for access by CUDA.
Parameters
pResource
- Resource to register
flags
- Parameters for resource registration
Deprecated

This function is deprecated as of CUDA 3.0.

Description

Registers the Direct3D resource pResource for access by CUDA.

If this call is successful, then the application will be able to map and unmap this resource until it is unregistered through cudaD3D9UnregisterResource(). Also on success, this call will increase the internal reference count on pResource. This reference count will be decremented when this resource is unregistered through cudaD3D9UnregisterResource().

This call potentially has a high-overhead and should not be called every frame in interactive applications.

The type of pResource must be one of the following.

  • IDirect3DVertexBuffer9: No notes.

  • IDirect3DIndexBuffer9: No notes.

  • IDirect3DSurface9: Only stand-alone objects of type IDirect3DSurface9 may be explicitly shared. In particular, individual mipmap levels and faces of cube maps may not be registered directly. To access individual surfaces associated with a texture, one must register the base texture object.

  • IDirect3DBaseTexture9: When a texture is registered, all surfaces associated with all mipmap levels of all faces of the texture will be accessible to CUDA.

The flags argument specifies the mechanism through which CUDA will access the Direct3D resource. The following value is allowed:

Not all Direct3D resources of the above types may be used for interoperability with CUDA. The following are some limitations:

  • The primary rendertarget may not be registered with CUDA.

  • Resources allocated as shared may not be registered with CUDA.

  • Any resources allocated in D3DPOOL_SYSTEMMEM or D3DPOOL_MANAGED may not be registered with CUDA.

  • Textures which are not of a format which is 1, 2, or 4 channels of 8, 16, or 32-bit integer or floating-point data cannot be shared.

  • Surfaces of depth or stencil formats cannot be shared.

If Direct3D interoperability is not initialized on this context, then cudaErrorInvalidDevice is returned. If pResource is of incorrect type (e.g, is a non-stand-alone IDirect3DSurface9) or is already registered, then cudaErrorInvalidResourceHandle is returned. If pResource cannot be registered then cudaErrorUnknown is returned.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaGraphicsD3D9RegisterResource

__host__cudaError_t cudaD3D9ResourceGetMappedArray ( cudaArray** ppArray, IDirect3DResource9* pResource, unsigned int  face, unsigned int  level )
Get an array through which to access a subresource of a Direct3D resource which has been mapped for access by CUDA.
Parameters
ppArray
- Returned array corresponding to subresource
pResource
- Mapped resource to access
face
- Face of resource to access
level
- Level of resource to access
Deprecated

This function is deprecated as of CUDA 3.0.

Description

Returns in *pArray an array through which the subresource of the mapped Direct3D resource pResource, which corresponds to face and level may be accessed. The value set in pArray may change every time that pResource is mapped.

If pResource is not registered then cudaErrorInvalidResourceHandle is returned. If pResource was not registered with usage flags cudaD3D9RegisterFlagsArray, then cudaErrorInvalidResourceHandle is returned. If pResource is not mapped, then cudaErrorUnknown is returned.

For usage requirements of face and level parameters, see cudaD3D9ResourceGetMappedPointer().

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaGraphicsSubResourceGetMappedArray

__host__cudaError_t cudaD3D9ResourceGetMappedPitch ( size_t* pPitch, size_t* pPitchSlice, IDirect3DResource9* pResource, unsigned int  face, unsigned int  level )
Get the pitch of a subresource of a Direct3D resource which has been mapped for access by CUDA.
Parameters
pPitch
- Returned pitch of subresource
pPitchSlice
- Returned Z-slice pitch of subresource
pResource
- Mapped resource to access
face
- Face of resource to access
level
- Level of resource to access
Deprecated

This function is deprecated as of CUDA 3.0.

Description

Returns in *pPitch and *pPitchSlice the pitch and Z-slice pitch of the subresource of the mapped Direct3D resource pResource, which corresponds to face and level. The values set in pPitch and pPitchSlice may change every time that pResource is mapped.

The pitch and Z-slice pitch values may be used to compute the location of a sample on a surface as follows.

For a 2D surface, the byte offset of the sample at position x, y from the base pointer of the surface is:

y * pitch + (bytes per pixel) * x

For a 3D surface, the byte offset of the sample at position x, y, z from the base pointer of the surface is:

z*slicePitch + y * pitch + (bytes per pixel) * x

Both parameters pPitch and pPitchSlice are optional and may be set to NULL.

If pResource is not of type IDirect3DBaseTexture9 or one of its sub-types or if pResource has not been registered for use with CUDA, then cudaErrorInvalidResourceHandle is returned. If pResource was not registered with usage flags cudaD3D9RegisterFlagsNone, then cudaErrorInvalidResourceHandle is returned. If pResource is not mapped for access by CUDA then cudaErrorUnknown is returned.

For usage requirements of face and level parameters, see cudaD3D9ResourceGetMappedPointer().

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaGraphicsResourceGetMappedPointer

__host__cudaError_t cudaD3D9ResourceGetMappedPointer ( void** pPointer, IDirect3DResource9* pResource, unsigned int  face, unsigned int  level )
Get a pointer through which to access a subresource of a Direct3D resource which has been mapped for access by CUDA.
Parameters
pPointer
- Returned pointer corresponding to subresource
pResource
- Mapped resource to access
face
- Face of resource to access
level
- Level of resource to access
Deprecated

This function is deprecated as of CUDA 3.0.

Description

Returns in *pPointer the base pointer of the subresource of the mapped Direct3D resource pResource, which corresponds to face and level. The value set in pPointer may change every time that pResource is mapped.

If pResource is not registered, then cudaErrorInvalidResourceHandle is returned. If pResource was not registered with usage flags cudaD3D9RegisterFlagsNone, then cudaErrorInvalidResourceHandle is returned. If pResource is not mapped, then cudaErrorUnknown is returned.

If pResource is of type IDirect3DCubeTexture9, then face must one of the values enumerated by type D3DCUBEMAP_FACES. For all other types, face must be 0. If face is invalid, then cudaErrorInvalidValue is returned.

If pResource is of type IDirect3DBaseTexture9, then level must correspond to a valid mipmap level. Only mipmap level 0 is supported for now. For all other types level must be 0. If level is invalid, then cudaErrorInvalidValue is returned.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaGraphicsResourceGetMappedPointer

__host__cudaError_t cudaD3D9ResourceGetMappedSize ( size_t* pSize, IDirect3DResource9* pResource, unsigned int  face, unsigned int  level )
Get the size of a subresource of a Direct3D resource which has been mapped for access by CUDA.
Parameters
pSize
- Returned size of subresource
pResource
- Mapped resource to access
face
- Face of resource to access
level
- Level of resource to access
Deprecated

This function is deprecated as of CUDA 3.0.

Description

Returns in *pSize the size of the subresource of the mapped Direct3D resource pResource, which corresponds to face and level. The value set in pSize may change every time that pResource is mapped.

If pResource has not been registered for use with CUDA then cudaErrorInvalidResourceHandle is returned. If pResource was not registered with usage flags cudaD3D9RegisterFlagsNone, then cudaErrorInvalidResourceHandle is returned. If pResource is not mapped for access by CUDA then cudaErrorUnknown is returned.

For usage requirements of face and level parameters, see cudaD3D9ResourceGetMappedPointer().

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaGraphicsResourceGetMappedPointer

__host__cudaError_t cudaD3D9ResourceGetSurfaceDimensions ( size_t* pWidth, size_t* pHeight, size_t* pDepth, IDirect3DResource9* pResource, unsigned int  face, unsigned int  level )
Get the dimensions of a registered Direct3D surface.
Parameters
pWidth
- Returned width of surface
pHeight
- Returned height of surface
pDepth
- Returned depth of surface
pResource
- Registered resource to access
face
- Face of resource to access
level
- Level of resource to access
Deprecated

This function is deprecated as of CUDA 3.0.

Description

Returns in *pWidth, *pHeight, and *pDepth the dimensions of the subresource of the mapped Direct3D resource pResource which corresponds to face and level.

Since anti-aliased surfaces may have multiple samples per pixel, it is possible that the dimensions of a resource will be an integer factor larger than the dimensions reported by the Direct3D runtime.

The parameters pWidth, pHeight, and pDepth are optional. For 2D surfaces, the value returned in *pDepth will be 0.

If pResource is not of type IDirect3DBaseTexture9 or IDirect3DSurface9 or if pResource has not been registered for use with CUDA, then cudaErrorInvalidResourceHandle is returned.

For usage requirements of face and level parameters, see cudaD3D9ResourceGetMappedPointer.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaGraphicsSubResourceGetMappedArray

__host__cudaError_t cudaD3D9ResourceSetMapFlags ( IDirect3DResource9* pResource, unsigned int  flags )
Set usage flags for mapping a Direct3D resource.
Parameters
pResource
- Registered resource to set flags for
flags
- Parameters for resource mapping
Deprecated

This function is deprecated as of CUDA 3.0.

Description

Set flags for mapping the Direct3D resource pResource.

Changes to flags will take effect the next time pResource is mapped. The flags argument may be any of the following:

  • cudaD3D9MapFlagsNone: Specifies no hints about how this resource will be used. It is therefore assumed that this resource will be read from and written to by CUDA kernels. This is the default value.

  • cudaD3D9MapFlagsReadOnly: Specifies that CUDA kernels which access this resource will not write to this resource.

  • cudaD3D9MapFlagsWriteDiscard: Specifies that CUDA kernels which access this resource will not read from this resource and will write over the entire contents of the resource, so none of the data previously stored in the resource will be preserved.

If pResource has not been registered for use with CUDA, then cudaErrorInvalidResourceHandle is returned. If pResource is presently mapped for access by CUDA, then cudaErrorUnknown is returned.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaInteropResourceSetMapFlags

__host__cudaError_t cudaD3D9UnmapResources ( int  count, IDirect3DResource9** ppResources )
Unmap Direct3D resources for access by CUDA.
Parameters
count
- Number of resources to unmap for CUDA
ppResources
- Resources to unmap for CUDA
Deprecated

This function is deprecated as of CUDA 3.0.

Description

Unmaps the count Direct3D resources in ppResources.

This function provides the synchronization guarantee that any CUDA kernels issued before cudaD3D9UnmapResources() will complete before any Direct3D calls issued after cudaD3D9UnmapResources() begin.

If any of ppResources have not been registered for use with CUDA or if ppResources contains any duplicate entries, then cudaErrorInvalidResourceHandle is returned. If any of ppResources are not presently mapped for access by CUDA then cudaErrorUnknown is returned.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaGraphicsUnmapResources

__host__cudaError_t cudaD3D9UnregisterResource ( IDirect3DResource9* pResource )
Unregisters a Direct3D resource for access by CUDA.
Parameters
pResource
- Resource to unregister
Deprecated

This function is deprecated as of CUDA 3.0.

Description

Unregisters the Direct3D resource pResource so it is not accessible by CUDA unless registered again.

If pResource is not registered, then cudaErrorInvalidResourceHandle is returned.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaGraphicsUnregisterResource